Older Gun with a lot of extras. Shoots 18 grainers MOA at 860fps for around 50 shots. Good first PCP or for custom build. Plenty of adjustability for more or less power.
.22 Puncher Breaker with Lane regulator set to 135bar.
Custom extended shroud with air stripper and 7 marauder baffles. Also includes most of the original shroud but this air stripper will not fit it.
Machined side lever cocking handle from Jefferson Air Rifles.
Transfer port has been opened up to allow more flow through the power adjustment knob. The poppet has been tapered and polished for better flow during firing cycle and the valve plenum space is also opened up. Basically all the Troy Hammer tricks. 2 extra new factory poppets included just incase and some orings.
5 x 12 shot magazines and 1 single shot loader.
Extended pica tinny rail installed under foregrip.
Magazine storage compartment in foregrip for one spare mag.
Flush mount anti rotational QD sling attachments by Impact Weapon Components installed on left side of stock. Very comfortable position for carrying and I'll include a cheap sling and the QD attachments.
Fill probe with QD and spare orings.
I did a sloppy job applying camo peel off wrap but it quiets the floating barrel and shroud from pinging when bumped against the supports and matches the cheek riser. The screw is missing for the cheek riser but I prefered the cold metal breech feel directly on my face.
Gun holds air and operates as it should but was my first PCP and has been assembled and reassembled many times.
Asking $350. plus half of shipping. PayPal Friends and family. Please PM for inquires.
Thanks for looking
J.
.22 Puncher Breaker with Lane regulator set to 135bar.
Custom extended shroud with air stripper and 7 marauder baffles. Also includes most of the original shroud but this air stripper will not fit it.
Machined side lever cocking handle from Jefferson Air Rifles.
Transfer port has been opened up to allow more flow through the power adjustment knob. The poppet has been tapered and polished for better flow during firing cycle and the valve plenum space is also opened up. Basically all the Troy Hammer tricks. 2 extra new factory poppets included just incase and some orings.
5 x 12 shot magazines and 1 single shot loader.
Extended pica tinny rail installed under foregrip.
Magazine storage compartment in foregrip for one spare mag.
Flush mount anti rotational QD sling attachments by Impact Weapon Components installed on left side of stock. Very comfortable position for carrying and I'll include a cheap sling and the QD attachments.
Fill probe with QD and spare orings.
I did a sloppy job applying camo peel off wrap but it quiets the floating barrel and shroud from pinging when bumped against the supports and matches the cheek riser. The screw is missing for the cheek riser but I prefered the cold metal breech feel directly on my face.
Gun holds air and operates as it should but was my first PCP and has been assembled and reassembled many times.
Asking $350. plus half of shipping. PayPal Friends and family. Please PM for inquires.
Thanks for looking
J.