Wildcat shooting 33.9g at 880 fps power mods. shot count/string

[sniperlabyo]

increasing reg to 155b and a heavier brass hammer got her up the speed. just a little louder and barrel flip. shooting 25g at 970fps, can't wait to shoot her at long range. 

250 to 160b fill

# shots 28

high 884

low 876

33.9g MK2

 

[zx10wall]

Very impressive. 

 

[PlanB]

that sounds good, ive been thinking you didnt need to get over 880 or maybe 900 or your accuracy woul d decrease. is your accuracy holding up?

 

[sniperlabyo]

vary accurate with the MK2 at 90y, hitting gum tree seeds on the tree that are 1" to 1.5" vary happy. the H&M grizzly bullets 31g going at 890fps almost as accurate, finally found a bullet shooting accurately on a BP at long range. . 

 

[JoeWayneRhea]

Ernest your the man !!!!! I been out today with the Carbine you fixed for me ...Man what a gun

 

[sniperlabyo]

Lucky you found a repair part so I can fix her!!!

 

[JoeWayneRhea]

. She did this yesterday . I put a thin coat of moly grease on internals . It is almost Air Arms smooth

 

[Boombots74]

Sniperlabyo,

I didn't know that there were aftermarket parts for the wildcat. Where did you get that hammer?

 

[sniperlabyo]

I make mods for the wildcat, I machine that hammer , made one for the cricket also for high power mods.

 

[ajshoots]

Great work Ernest!! I have shot the heavies up to 920fps and they still remained very accurate at that speed.

 

[sniperlabyo]

Shot them on a mod 9mm cricket with a TJ .25 barrel got it up to 990fps --- still stable and accurate. 

 

[ajshoots]

WOW!!

 

[hsnmz]

Did you change the hammer spring also

 

[sniperlabyo]

No, couldn't find a stronger one--that's why I installed a heavier hammer. 

 

[hsnmz]

How about using a Royale 500 or bobcat .25 hammer spring or a Boss .30

 

[LEE-IN-VA.]

sniperlabyovary accurate with the MK2 at 90y, hitting gum tree seeds on the tree that are 1" to 1.5" vary happy. the H&M grizzly bullets 31g going at 890fps almost as accurate, finally found a bullet shooting accurately on a BP at long range. .

I'm assuming you still are using the smooth twist barrel?

 

[sniperlabyo]

yes, highly polish

 

[zx10wall]

"hsnmz"How about using a Royale 500 or bobcat .25 hammer spring or a Boss .30

Why resource OEM parts when you have the means for custom parts? Great work ER. 

 

[Longbrownbox]

I don't know how to make new parts for my .25 cal Wildcat but fortunately I don't need to. Shot 3 mags (24) through the chrony & here's what I got. 
High 893
Low 885
Avg 888
ES 8
SD 1
When I'm shooting I don't take out the mag, I just continue to add a pellet. Loving it!

 

[poorshot]

sniperlabyo.

​PM sent Cheers.