Wildcat Pellet Probe depth

[Buckshutr]

I recently bought a used Wildcat MKll .30. I want to set the correct pellet probe depth and have seen two different depths mentioned.
I have seen 28.55 to 28.8mm listed from FX but also watched a video by Earnest Rowe listing 33mm on a MKlll. Which is correct for a Wildcat MKll??

 

[madeintheuk]

Ive always used 28.8, but the best way to check Is to pull barrel and probe. Insert probe into barrel and line up transfer port hole with probe. Then mark a line on the probe with a fine tip sharpie or similar. Reassemble the gun, and set your probe depth so the mark sits against the edge of the transfer port when it’s closed. Then you know for sure it’s the correct depth.

 

[douger]

pull the top screw off the block you will see center tp opening, mark center for probe and adjust, i sure use blue tight on the two tiny grub screws from moving

 

[Buckshutr]

Thanks guys! I will tear into it this weekend.