Wildcat mk3 testing

[PkShooter]

So after fitting the huma reg, plenum and dual tp, I had some time to test numerous pellets and slugs in my wildcat sniper .22 cal

range was 50 yards

only pictured groupings that were of worth noting 

jsb knockout slugs 216 were clearly the best ... the single shot was before zeroing, then 9 shots in centre 

reg is at 125, getting around 40 good shots per fill before fps drops
will be interesting to use to Ernest Rowe plenum 

so glad it wasn’t perfect with the fx ones, would’ve been an expensive gun to keep lol

 

[PkShooter]

the above results with the knockouts was on power setting 5 doing ave of 965fps

so I should probably lower reg pressure a little to achieve the same speed on setting 7

 

[idaho_varminter]

Can I ask where you bought the plenum? I haven’t been able to find any, except for the 1.2” one. The 2.5” seems to be sold out everywhere. 

 

[PkShooter]

Can I ask where you bought the plenum? I haven’t been able to find any, except for the 1.2” one. The 2.5” seems to be sold out everywhere.

Ah it’s not the Ernest plenum, it’s the huma one I’ve fitted 

 

[idaho_varminter]

Thank you, PkShooter. As it turns out, the Ernest Rowe plenum won’t work on the Wildcat MKIII, except for the earliest batches. I’m still waiting for mine to ship, so mine won’t be compatible. I’m glad I found that info on another post here. AGN saves the day again!

 

[PkShooter]

Ah I didn’t know that, so thanks for sharing