• In order to send private messages to other members, you must have a minimum of 10 posts on the site.

Wildcat bottom pic rail

Bigragu

Member
Jul 8, 2018
3,593
260
CA, United States
    These are what you need-

    the structural fasteners to mount your rail. Don’t even think about just screwing the rail onto the stock. On synthetic stocks screws will wallow out loose and the threads into the stock will be useless-

    https://www.amazon.com/gp/aw/d/B0772V352B?psc=1&ref=ppx_pop_mob_b_asin_title

    This Atlas 3.5” rail has a curved back side that mounts up perfectly onto the curvature at the wildcats underside of the forearm. It has a QD hole for QD sling attachment-

    https://www.amazon.com/gp/aw/d/B003LSKLBQ?psc=1&ref=ppx_pop_mob_b_asin_title


    to do the job right you’ll need a 7/8” paddle bit along with some JB Weld to epoxy in the fastener T- nuts. Look up on how to install T- nuts for Atlas bipod rails on the net.