Whole new level of silence

...thought my Shogun was overkill on my crown lol. Giving me ideas for my MKII when I get it! 


I make caliber specific baffle kits for the OEM FX moderators that make them quieter than anything I've seen on the market. You can add more 3" (75mm) long center tubes to make them even quieter. A double center tube 7 3/4" (197mm) on my 100+ fpe .30 Impact makes it way more quiet that the Ronin I had on it. The difference is like night and day.

1558666355_14588594855ce75c73e4bf52.12668207_FX Double 1 -.jpg
1558666356_6512007525ce75c7429e039.07706796_FX Double 2 -.jpg




I can vouch for this set up from Heavy Impact. Although I have never had a DonnyFL or whosever’s moderator on my 30 cal WC previous to compare, I can tell the difference enough to know it works when compared to just using the stock can that FX provides with the gun. With two midsections connected, it actually looks better at the end of the Wildcats shroud than a big honking can. More sleek looking





1558713931_21070908725ce8164bce1281.01154788_0AB2BD24-E6BD-419C-A4E5-4D732C6899C2.jpeg
P


 
Wow! What an awesome birthday gift! That's a great friend! 
I have the exact same suppression setup, but in my case, it broke the bank..
Here it is on my Artemis PP700S-A .22 cal pistol, 
and again on my Kral Arms Puncher Breaker .22 cal bullpup.. 
Quiet as a 'mouse fart'? Psh.. More like an 'ant fart'!
1f923.svg


1558646209_10447573995ce70dc1d41d61.90500840_20190304_113534.jpg

1558646225_10100312755ce70dd18a1975.70105674_20190304_114841.jpg

1558646236_10246550595ce70ddc6e9862.50032701_20190304_115211.jpg


In all seriousness, I got the Emperor V3 for my .25 cal Kral Nemesis, 
and I won't lie.. I really did get the extender just to throw on the pistol - as a joke!
That combo though.. WOW! It is so quiet it's ridiculous!

I've been limited to shooting 10 meters indoors only, and I really wanted to test the .25 cal.. 
1 shot, and the crack and echos almost made my ears bleed.. Not anymore! 

Accuracy - Here's an interesting one.. 
With the combo on my .25, the accuracy and consistency is the same - Dead on. 
With the combo on my .22 pistol, the accuracy and consistency is the same also.. 
But..
When I threw the combo on the Puncher Breaker .22 cal, it didn't group well at all.. 
I think that the added volume of the extender must have been effecting the pellets - in a bad way.. 
Remove the extender, use just the Emperor V3, and it was back to dead-on accuracy / consistency.

Weird..

So apparently using the combo on smaller caliber setups can be hit and miss..
My setup was originally the big-bore version, but Donny and I converted the ends down to .25 or .30
I think it originally came set up for a .45 cal

1558646899_14805491825ce71073c695e8.70427366_TheMoreYouKnow.jpg
 

1f603.svg
1f44d.svg
 

Sam -

Man, that Kral looks incredible!!!
 
So after an extensive shooting session yesterday with this setup I got some results.

With the extender and Emperor I got considerable barrel droop as I figured I would. FPS stayed good but shot about 4 ft lower than having just my Snipe moderator on it.

Switched to just the Emperor and all is well in the world, great accuracy and very quite. Popped a starling at 145 yards so it still shoots very well. .

Switching over to 34gr JSB mark iis for added punch at long range. Getting 835fps on max setting with hammer fully adjusted. Reg at 130bar, this speed is fine for me and my holdovers didn't change much If any.