Whoa! Awesome mod for FX Wildcat Owners

[steppenwulf]

 



Well that is if you like to shoot a single pellet instead of using the mag like I do. I did a search for a single shot tray for my WC. I did find them listed at Airgun Depot, but they were listed as “on order”. So off to the UK I went and found one there for about $25 shipped. Problem was (maybe it was just me ?) the breech is so deep in the action it requires a ramp that is quite long and the pellets tended to move around on their way down and land the wrong way.

So again the search continued. Then i found this. Works great! The loader just needs a flip from your thumb to open. The pellet is held in place by an O ring, so once it’s in it stays put until the probe is closed. The assembly includes the entire cheek piece

. About $59 shipped and comes in 177, 22, and 25.



https://smwengineering.co.uk/products/copy-of-fx-wildcat-hinge-loader-22-and-177

 

[John "spysir" Blount]

As long as alignment is good an excellent way to go. Crosman did this with the ssp co2 pistol and allowed for cal change with inserts.

I have to give the career 707II a pass -and with a mod it could be single loaded- but otherwise I personally wouldnt want a rilfe that couldnt be single loaded some how.

Thanks for sharing.



John

 

[Hynzie]

yup STUART makes some great mods for FX and AA the prices are not to bad

 

[Coldair]

Looks similar to the BSA single shot loader and the HW100s. Thanks for sharing.



CA

 

[Coldair]

Spysir-

I think the 707IIs had an openning on the opposite side of the receiver to single load your pellets but rather cumbersome to load that way without a skewer to nudge those single pellets in or pointing the rifle muzzle down then vigorously bumping the gun with your palm until the pellet shakes itself into the breech.



CA

 

[mister12ax7]

Thank you for taking the time to share this info.

 

[Revoman]

Yup, thanks for sharing even though ya cost me $108 buying 'what I think I need'....

Make money to spend right?

mike

 

[JoeKool]

Hmmm?

Yep

I’m gonna have to get one... Not today, but I’ma have to get one.