is your filter after the relief valve? if so I would suspect that there's a blockage in the filter not letting it bleed.. did you hook and unhook the Foster fitting before you filled, just to make sure it's not what might be catching?
I know all Foster fittings ( either "sex") are not the same. I buy all mine from PA & depending on the color (black, stainless etc) some don't marry up well. I have multiple whips & filters & have had to sand some down or change O-rings to allow connection/release. I've had several compressors as well.
Thanks Mark, i think you are spot on, i kust connected evwrything without trying to take any fittings baxk off with no pressure. I thought imwould degas the gun by removing the bottle (and maybe slightly opening both regs) but i will try slightly loosening their filter (which I suspect). The whip came off the compressor easily (before their filter, i have a big one between their filter and the gun). So from their filter to the gun everything is pressurized. Thanks for the help. I seem to have the worst luck with compressors. But life’s good. Gave the squirrels another afternoon off. Lee
It had leaked slihtly when i checked it agin late last evening so, fingers crossed. Thanks. I will include a picture if i cant resolve it.
I was going by his “high power tuning” vid. But il watch and save this one. Thanks a bunch!
