Air Arms Where to source a pro elite piston seal
- Thread starter Charlie350
- Start date
Guys can go here and order on eu gun stuff if not available in the usa
https://twchambers.co.uk/pro-elite/pw034-piston-seal-air-arms-pt-no-bb330/
I'd email and ask if this would fit ..
https://twchambers.co.uk/pro-elite/pw034-piston-seal-air-arms-pt-no-bb330/
I'd email and ask if this would fit ..
New-Bam,Gamo,TX 200, Problem Solver Seals
Maccari Custom Airgun Shop. Airguns and related accessories. Springs,tune kits,gunstocks,Beeman, Rws, Webley and many others. Sales and service
www.airrifleheadquarters.com
Upvote 0
Pro Elite is a 30mm seal and no one here in the states has them. I ordered from chambers and the seals I received will take some fitting because they are oversized.
Upvote 0
If uk sold id do at least 3 . Cause of you goof the fit or a butterfinger moment and ruin the " one " seal you ordered you got 2 more right there handy ... Not going through another uk order and shipping stuff involved.
Opinion
..
Opinion
..
Upvote 0
Might be a misprint or something because that's not right
that sounds like spec's for a Pro Sport. Last edited:
Upvote 0
I did exactly that! LolIf uk sold id do at least 3 . Cause of you goof the fit or a butterfinger moment and ruin the " one " seal you ordered you got 2 more right there handy ... Not going through another uk order and shipping stuff involved.
Opinion
..
Upvote 0
I have had great luck in the past with ordering from Chambers and Knibs. They are helpful and handle shipping well, but unfortunately do not control the couriers or customs agents...
I am gonna plug ProtekSupplies as well. Super helpful staff, and a deep supply of weird and wonderful parts.
I am gonna plug ProtekSupplies as well. Super helpful staff, and a deep supply of weird and wonderful parts.
Home
Your number 1 shop for air rifles, pistols, army surplus & outdoor equipment.
www.proteksupplies.co.uk
Last edited:
Upvote 0
Don't know if you read this
www.airgunnation.com
Maybe some interesting info in it on that gun
P.s...
I seen you posts around some like 3 years back (2023,?). On this sane thing .
Anyways one yhing i neglected to post in here was the guys reworking the piston face/ anvil to accept the hw seal
I guess this one
There saying it makes a better fit and dont need epoxy glueing on to hold it on the piston head as the factory aa seal .
Tuning - Repairing a 1998 Air Arms Pro Elite
Back in 1998, I purchased an Air Arms Pro Elite in .22 from Jim Maccari. I used it a lot during the first few years, then my interests shifted to other things. About 5 years ago, I took it out for a cleaning and it didn't fire correctly. It suffered the common (for Pro Elites) seal detachment. I...
www.airgunnation.com Maybe some interesting info in it on that gun
P.s...
I seen you posts around some like 3 years back (2023,?). On this sane thing .
Anyways one yhing i neglected to post in here was the guys reworking the piston face/ anvil to accept the hw seal
I guess this one
There saying it makes a better fit and dont need epoxy glueing on to hold it on the piston head as the factory aa seal .
Last edited:
Upvote 0
The PE seals are prone to popping off, so make sure that you epoxy the new one onto the piston head.
Upvote 0
Looking at that pe piston head i can see why now .. not much to grab a hold on ...
Still that machine work would be last ditch effort if no other choice to reseal.
Id go get them at Chambers and glue then call it good as a conversation peice or a few shots to keep it from seizing up.. / collector item gun
Upvote 0