Air Arms Where to source a pro elite piston seal
- Thread starter Charlie350
- Start date
Guys can go here and order on eu gun stuff if not available in the usa
https://twchambers.co.uk/pro-elite/pw034-piston-seal-air-arms-pt-no-bb330/
I'd email and ask if this would fit ..
https://twchambers.co.uk/pro-elite/pw034-piston-seal-air-arms-pt-no-bb330/
I'd email and ask if this would fit ..
New-Bam,Gamo,TX 200, Problem Solver Seals
Maccari Custom Airgun Shop. Airguns and related accessories. Springs,tune kits,gunstocks,Beeman, Rws, Webley and many others. Sales and service
www.airrifleheadquarters.com
Upvote 0
Pro Elite is a 30mm seal and no one here in the states has them. I ordered from chambers and the seals I received will take some fitting because they are oversized.
Upvote 0
If uk sold id do at least 3 . Cause of you goof the fit or a butterfinger moment and ruin the " one " seal you ordered you got 2 more right there handy ... Not going through another uk order and shipping stuff involved.
Opinion
..
Opinion
..
Upvote 0
Might be a misprint or something because that's not right
that sounds like spec's for a Pro Sport. Last edited:
Upvote 0
I did exactly that! LolIf uk sold id do at least 3 . Cause of you goof the fit or a butterfinger moment and ruin the " one " seal you ordered you got 2 more right there handy ... Not going through another uk order and shipping stuff involved.
Opinion
..
Upvote 0
I have had great luck in the past with ordering from Chambers and Knibs. They are helpful and handle shipping well, but unfortunately do not control the couriers or customs agents...
I am gonna plug ProtekSupplies as well. Super helpful staff, and a deep supply of weird and wonderful parts.
I am gonna plug ProtekSupplies as well. Super helpful staff, and a deep supply of weird and wonderful parts.
Home
Your number 1 shop for air rifles, pistols, army surplus & outdoor equipment.
www.proteksupplies.co.uk
Last edited:
Upvote 0
Don't know if you read this
www.airgunnation.com
Maybe some interesting info in it on that gun
P.s...
I seen you posts around some like 3 years back (2023,?). On this sane thing .
Anyways one yhing i neglected to post in here was the guys reworking the piston face/ anvil to accept the hw seal
I guess this one
There saying it makes a better fit and dont need epoxy glueing on to hold it on the piston head as the factory aa seal .
Tuning - Repairing a 1998 Air Arms Pro Elite
Back in 1998, I purchased an Air Arms Pro Elite in .22 from Jim Maccari. I used it a lot during the first few years, then my interests shifted to other things. About 5 years ago, I took it out for a cleaning and it didn't fire correctly. It suffered the common (for Pro Elites) seal detachment. I...
www.airgunnation.com Maybe some interesting info in it on that gun
P.s...
I seen you posts around some like 3 years back (2023,?). On this sane thing .
Anyways one yhing i neglected to post in here was the guys reworking the piston face/ anvil to accept the hw seal
I guess this one
There saying it makes a better fit and dont need epoxy glueing on to hold it on the piston head as the factory aa seal .
Last edited:
Upvote 0
The PE seals are prone to popping off, so make sure that you epoxy the new one onto the piston head.
Upvote 0