Where can I get the FX Impact (MkI) air gauge o-ring / washer thingy?

Jump to latest Follow Reply
yenniedn

yenniedn

Member
Aug 9, 2015
2,710
1,273
Northern CA, United States
Hello AGN:

I replaced my FX Impact (black) air gauges with some WIKA gauges and in the process, developed a leak at the front gauge. My Impact is the original MkI Impact that had all applicable parts upgraded to MkII specs but I think the trigger block where the front gauge lives is the original part so I believe this o-ring is different than the MkII trigger block (I think I read that it might be more of a washer type o-ring). See attached photo below...

Where is the best/fastest place to get some replacements? Better yet, do any local Bay Area airgunners have any that I could buy???

fx gauge oring.1599155423.jpg


Thanks in advance for the help!
 
Thanks for the responses, guys!

@Glem.Chally: no, the WIKA gauge does not come close to bottoming out against the action. Those marks were there before, probably from when the rifle had to original, smaller FX gauges. In any event, I didn't put those marks there; I typically much more careful to not mark up stuff when I'm working on things.

@stoti: did you call or email FX to get those? Let me know where and what's the best way to get a hold of them. Or...can I pay you to mail a couple of them down the road to SJ? ;)
 
Upvote 0
The link I posted above takes you to purchase the o rings.
Click to expand...

Hi - thank you! Any difference between these and the ones Stoti showed from FX? If the FX ones are specifically fitted, I'd prefer to get the factory ones. If not, I can get these . . . do you (or anyone else) have a list of other Impact o-rings that I can purchase at the same time to get the minimum $15 order for free shipping? ;)
 
Upvote 0
Yen, you can download the parts diagram from FX for your gun, and all the o rings are called out for in size and durometer rating. From their with your list, go to oringsandmore.com and order these metric o rings. You want easier than that? Go to Amazon and type in captain o rings fix impact and you’ll get a kit pre put together, for all calibers, to you for $35 free shipping cause to a prime item
 
Upvote 0
The link I posted above takes you to purchase the o rings.
Click to expand...

Hi - thank you! Any difference between these and the ones Stoti showed from FX? If the FX ones are specifically fitted, I'd prefer to get the factory ones. If not, I can get these . . . do you (or anyone else) have a list of other Impact o-rings that I can purchase at the same time to get the minimum $15 order for free shipping? ;)
Click to expand...

https://www.airgunnation.com/topic/impact-o-ring-list-corrected-with-links/

Yenniedn: these are the same o rings. The link will take you to the list of o rings that is required for the Impact and direct link to the part store. Stay safe.
 
  • Like
Reactions: yenniedn
Upvote 0
The link I posted above takes you to purchase the o rings.
Click to expand...

Hi - thank you! Any difference between these and the ones Stoti showed from FX? If the FX ones are specifically fitted, I'd prefer to get the factory ones. If not, I can get these . . . do you (or anyone else) have a list of other Impact o-rings that I can purchase at the same time to get the minimum $15 order for free shipping? ;)
Click to expand...

https://www.airgunnation.com/topic/impact-o-ring-list-corrected-with-links/

Yenniedn: these are the same o rings. The link will take you to the list of o rings that is required for the Impact and direct link to the part store. Stay safe.
Click to expand...

Thank you so much for this info, @funshine! I just ordered all the relevant o-rings . . . saved me a lot of time and effort!
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu