I want to put a Sekhmet digital gauge on my Hatsan Factor. Do you think it's 1/8 BSPP threads? It just sticks off the side of the gun. Thanks -Nate
Tuning What threads are my Hatsan air pressure gauges?
- Thread starter kaylaindy
- Start date
Degass the gun empty all the air and be careful unscrewing the original gauge put tape around the outer chrome before unscrewing with a socket or wrench. They are probably the same threads. Use yellow teflon tape properly on the threads heres a video. DO NOT USE LOCKTITE!
Start at 1:15...
https://youtu.be/KAW_PIrKw10
Start at 1:15...
https://youtu.be/KAW_PIrKw10
Upvote 0
I want to put a Sekhmet digital gauge on my Hatsan Factor. Do you think it's 1/8 BSPP threads? It just sticks off the side of the gun. Thanks -Nate
it probably is 1/8 BSPP, but there is a chance it may be 10 mm x 1, it would be nice if they could mark them inside the glass of the gauge.
Upvote 0
I could be wrong on the sizes, I found a gun I thought would be 10 mm x 1 and it turned out to be 1/8" npt..... ? you never know what they will put on, what ever is cheapest I guess.
Upvote 0