What springer did you shoot today?

[1911Tex]

Do you have the original spring? I tried the 13.4 and they were in the 700-750 fps range so I just dismissed them as too heavy.

No I have the Vortek PG4 tune up kit. Even with the original spring you use, nothing wrong with your fps, that is close enough...the .177 Monster Diablo has great knockdown power.....as well as good trajectory. Better than going to .22's loop trajectory at distance. A great option! I sort them to 10gr +/- 13.43gr. World of difference.

 

[beerthief]

Sighted in Diana model 60 .177 Tenex 4.52 8.4 grain 580 FPS

@ 20 yards

 

[PEP3]

Having a margarita and shooting my standing range with the HW30. Im really liking the 2.5”s at 25 yards, it’s like shooting soda cans and not having to pick them back up. It is very hot here in NC.

 

[Florida_Man]

Beeman R7 today. It also took two squirrels this morning.

 

[crowski]

Just finalized a deal on a Walthers 210j. Can’t wait for this one. Been too busy to shoot. But I do every chance I get. Bass opens in 2 days. Crow

 

[Florida_Man]

Almost through the first tin of 500 with my new R7. My plan is to casually shoot another 500. Disassemble and properly lubricate it. Then I’ll go through all my suitable pellets for it and see what it likes.
That was my shooting position yesterday and today.

 

[crowski]

Got time after supper to shoot. Grabbed a Diana 34 .22. When I got to my bench it turned into a .177. Bought this gun used. Someone did a really nice tune on it.

Deadly accurate. 2 misses all night. Impressive gun. Crow

 

[Florida_Man]

Finished the tin of 500 RWS 7gr with my new R7. The next 500 for the wear in process is 500 CPHP. And so far it’s looking good, better than the 7gr wadcutters.
This is the first 5 since switching, the two groups after that, except one bad pellet, were tighter groups. All the CPHP are fitting in snug. I had one that went in really easy, and it hit .75” lower than all the other pellets.

 

[crowski]

2 rifles tonight . A Diana 350mag. 22. Sighting in for a mission. This gun is a cannon

The other gun was a Diana34 .22. No pic. Crow

 

[Steve Milbocker]

Struggled with my 300S this morning. Kept them in the black but that’s about all I could say. Grabbed my RWS 45 and shot this target. Too bad I let one get away

 

[Florida_Man]

This was my best 5 shot group at 20y using CPHP from my R7. The dots are .48”

 

[TnCnDn]

This was my best group at 20y using CPHP from my R7. The dots are .48”

View attachment 572139

Impressive to say the least. Struggling to get there with my latest. What gr pellet? I have a new R7 coming from Mike Melick at Flying Dragon Airguns fully tuned. First new R7 since 82.

 

[Florida_Man]

Impressive to say the least. Struggling to get there with my latest. What gr pellet? I have a new R7 coming from Mike Melick at Flying Dragon Airguns fully tuned. First new R7 since 82.

CPHP 7.9gr
I’m using a 6x Discovery scope. I can’t do that with iron sights yet
I love this little rifle, I can’t wait to teach my son to shoot with it. I shot it more today than my Revere

 

[TnCnDn]

Ahh yea...I should have caught that handicap. I have one of those R7's with no sight attachments with a blue ribbon.

 

[Iowa Airgunner]

I went out to the range with me TX200 today. This rifle was set up for WFTF open piston Field Target and shoots really well at about 12 ft lb. But it had a 10-40x56 scope and a hamster plus the big side wheel. The gun shoots really well but was bulky and I could not see the loading port at all because of the scope. Now I have a compac10- 16 x50 leapers scope with a nice compact coma wheel. I can see the whole loading port . The balance is fantastic. It’s like a new gun.

Today I got to the range and made the rough sight in . Hitting 55 yard spinners and clearing a couple field target lanes.

Tomorrow I’ll be fill in the gaps on my dope chart. And testing some 4.52 size pellets.

 

[crowski]

I went out to the range with me TX200 today. This rifle was set up for WFTF open piston Field Target and shoots really well at about 12 ft lb. But it had a 10-40x56 scope and a hamster plus the big side wheel. The gun shoots really well but was bulky and I could not see the loading port at all because of the scope. Now I have a compac10- 16 x50 leapers scope with a nice compact coma wheel. I can see the whole loading port . The balance is fantastic. It’s like a new gun.

Today I got to the range and made the rough sight in . Hitting 55 yard spinners and clearing a couple field target lanes.

Tomorrow I’ll be fill in the gaps on my dope chart. And testing some 4.52 size pellets.

View attachment 572200

View attachment 572201

Not hard on the eyes. Very nice, Crow

 

[crowski]

Bought these 2 from the same guy. A FWB 601. Just getting used to them. Smooth is an understatement. He has a lefty like this for sale.

Also shot a FWB 300J. Masterpiece. These are a blast. Great shooters.

Going the have to set up a 10 meter range. Crow