What press for slugs resizing?

[bigHUN]

I have never done this before, but lurking with the idea for some time.
Not really opening a new hobby to swag my own slugs, but to resize only.
Browsing now the NOE sizing kits, some of the dimensions I am interested in for .22 and .25 are out of stock currently.
In meantime I would like to a prepare a press, but I must admit I never did reloading on firearms neither.
I am seeing several second hand presses in my Canadian gunpost classifieds, but open to suggestions ...

btw, I have access to machining if any of the press needs some altering.

 

[IMADMAN]

I picked up a Lee APP press recently along with a few Noe sizing dies. I have yet to use it, but watched a few videos and it seems to work well.

 

[Revoman]

bigHun --=--
I can't imagine that an RCBS Rockchucker press won't perform the resizing for you. It is very robust press and I have had one since the 1970's that is still putting out good rifle rounds. It takes some pressure on the handle to do rifle rounds, so a resizing of a small slug should be no problem.
It takes the standard 7/8" threaded dies that most manufacturer's use for reloading.
So as long as it's securely bolted to a strong bench with no flex, you should be good to go.

 

[coffeepan]

Lee Challenger Breech Lock Single Stage Reloading Press

The Lee Breech Lock Challenger Press is a great press that is full of features. Some of these features include a the breech lock quick change die system...

www.midwayusa.com

I've been using this Lee press since I started casting myself. NOE's sizing system fits it and of course Lee's sizing dies. Works very well

 

[Bowhunter73]

I use the Lee classic press for everything from reloading for my PBs to swagging bullets with the Corbin dies it is one tough press.

 

[DesertSilver]

I'm using a RCBS rock crusher press for sizing my slugs but it's way more than is needed.

 

[durbs75]

Lee APP press and NOE sizing bushings.

 

[bigHUN]

Thanks guys,

 

[Deleted member 15252]

Here is my setup with NOE die and a RCBS press. Does not take much pressure I use a 1/4" Delrin rod for the plunger.

 

[DesertSilver]

That's the one I use

 

[bigHUN]

I found one .22 liner (STX-A Slug) hidden on the shelfs, order it from US but stuck in customs since Mar.30th. Waiting for that one to get to my hands and slug it. I measured four of my liners in .22 and .25 and not two the same.
I would order NOE sizing bushings but those all in inches. Anybody know for a source that makes these bushings in mm?

 

[Deleted member 15252]

Bushings will run in 1 thousands increments. Just do the math conversion.