What JSB 10.34 .177 head size do you use in your Marauder Gen 2 ??

[davecole]

Do you have a .177 marauder Gen 2 with a factory .177 barrel? 


Do you shoot JSB 10.34 pellets?


Do you size your pellets?


Do you use a Pelletguage sizing tool?


If you can answer "YES" to these four questions, please continue. If not, please ignore this post. 
​

What size have you found to be the more accurate at about what distance? (obviously, further is better)

Sorry, really not looking for suggestions, guesses, internet voodoo, just experience with a simple answer. (i.e. 4.50mm. 4.51mm. 4.52mm etc.) 

 

[addertooth]

I consulted my Magic8 ball, after sacrificing a chicken and dropping tea leaves in the blood. The ball told me that there are some variations in Marauder .177 barrels, and what works awesome for one gun, may not be optimal for the next gun.

 

[whitefox545]

Dave, The above info is absolutely correct but if you check the head sizes that are in the tin you will probably find a great variance from what is marked on the tin compared to what you will find in the tin. (10.34 seems to be the most inconsistent by my findings) Best bet is to size them into groups and then shoot them to find what size your rifle prefers then start your search for the size your gun shoots the best. I have tried Many vendors in the last year trying to find a lot# that actually had what i was looking for (4.52) and have been unable to locate any tins with more than a few of them in any of the tins!! I know this is not what you asked for but I am just warning you that you may think you have purchased a certain size but that may not be what is actually in the tin!! Good luck with your M-Rod !! :yes: J.L.