What did you do to improve the trigger on your Air Venturi Avenger

[engfred]

My Avenger is recently taken onto the workbench for improvement.
I have also well modded FX Crown and a RedWolf so the comparison is unfair but anyway ......

I now improved the barrel
Polished the barrel and improved the shroud now with integrated airstripper and more suppert places- it now works great.
Removed the front stock and designed and test 3d printed a solid bipod holder that is attached to the two air tubes only with 20 nos. m3 screws.
Barrel is now completely free floating. - It works great no longer any POI shifts .
I polished trigger sear, fittet a much lighter spring for the sear, and fitted longer adjustment pin screws.
Trigger is now a lot easier to pull and considerable more crisp.
But i hate the awfully placed and poor finger formed trigger grip.
I am now just one step away from cutting it of and make a ø4 mm pin instead.
What did you do to upgrade the trigger on the Avenger?

So many Avengers is out there so somebody must have found the perfect solution for the trigger?

All 3d printed parts are my own design and prints - not after markets

Claus from Denmark

 

[Mangoesbroke]

Disclaimer do anything I'm about to say at your own risk. I removed the saftey and have added longer adjustment screws and was able to make it have basically a single stage hair trigger which I like. My avenger is just used for benchrest.

 

[EmptyTin_Tim]

Sounds like you've done everything you can with the current hardware.

I put in longer screw and it's okay for me the trigger doesn't break crisp but has a slight roll to it. I am accurate enough though.

But sounds like you need to do this:

Goodbye Avenger trigger shoe

My .22 Avenger is an extremely accurate rifle, way beyond its price point suggests. The stock trigger leaves a lot to be desired though. I’ve already modded it by changing both springs to lighter ones and polished all of the engagement surfaces. One thing that has always bugged me was the shape...

www.airgunnation.com