What did you do airgun related today.

[JaceSpace1369]

Are you porting anything else?

Eventually I will, Once I get all the parts done and I see what it does before opening it up. I already fordered a ported valve that has opened up to 5mm, i ordered a custom 8.8g tungsten hammer. I will be porting the barrel to 4.7 or 5mm as well as the bridge channel but that's it. I also have a low force peek valve that'll allow me to get the same power at a lower reg setting.

On my coworkers notos with the huben valve I ported the barrel to 4.5mm, bridge to 4.7mm, pressure plate to 4.9mm and I got a max of 900fps with 15.89gr at 1500psi on the reg and a 5g hammer. It may get more power with reg set lower, it may not. But i'm hoping it does with the new valve coming in.

 

[RoosterCogburn]

First, I reamed the FX Impact fill nipple access hole to 19mm so I could use any 8mm female QD.

Installed pic rail on the bottom of the DRS Tac fore end.

 

[boscoebrea]

I tried to stabilize my shooting bench.It keeps leaning toward the right and getting too wobbly.

 

[Florida_Man]

Big day for me shooting, I shot a 200 with my 177 revere on the 30 yard challenge target.

This evening i tried out a Milwaukee battery china special work light to see how it works. I have to report in that at low power it illuminates the target great. I am using fixed power Sightron scopes.
My plan now is to try and shoot in the evening a few nights a week. It easier when my 2yo son is in bed.