Shipped off the Krai L 177 to a new home, sent the veyron plus 10x30 back. In the last few days I shipped out the thermal hand held, gk1 parts and rehomed a U2 compact.
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Sighted in the U2 .177 600mm after cleaning it up, rebuilding the regulator, got it running 20gr .1775 Take aim slugs at 990fps, 18.5gr at 1090fps
Upvote 0
I set up a new target thing at the range. I put a saw blade on a wire and hang a bell behind the saw blade. 3/8 hole and 5 1/2 inch blade for the 45 yard one and a bigger blade for the 100 yard target. It’s still in the works so I used tape and just took a shot. Missed just low right . The next two went through 3/8 of an inch and did not even wiggle the blade.
Airguns are amazing.
Airguns are amazing.
Upvote 0
Picked up a Brum Tomahawk this week but it was missing its slimtech silencer. Wasn't much fun to cock the 13" LW barrel, so had a rummage in the shop....only had stainless in but made this little 1/2" unf mod anyway-
Does the job and looks 'ok', but will be replacing it with something more correct in the long run.....
Does the job and looks 'ok', but will be replacing it with something more correct in the long run.....
Upvote 0
Dang... just had a couple dozen mediocre circular saw blades I consigned to the garbage can (and cost me nothing to begin with)!
Upvote 0
Today was pretty good day at the swapper. Couple weeks back bought a full, red Sheridan 500 rd. tin of 5mm pels for $20. Today, a friend of the seller bought (and resold to me) two earlier, gray/white 500 rd. tins of 5mm pels (only one tin was about 95% full) for $35.00 the pair. Then found the three pictured "spice-cans" of Crosman .22 cal. pels. One is sealed and two opened but basically full, for $10. Lastly got the Ontario US machete for $10. One never knows where your pellet rifle will take you...
Attachments
Upvote 0
Working on my auction treasures. Painted the barrel of my Crosman 114, did the first coat of TruOil on it's stock. Did the first coat of Minwax on the stock of the Benjamin 347 and while its drying I attacked the barrel and action with Gun Scrubber then gave it a nice wipe down with TriFlow. A fun day even though my favorite college football team got stomped by Texas Tech.
Upvote 0
Printed 3D hangers for my DRS Tactical and mounted it on the wall. Now I don’t have to move it off the washer to do laundry.
Upvote 0
Had a gopher free-loading in my wife's garden this year. Shut down the free buffet with a 60 yard shot off of the back deck.
Upvote 0
Put a crc plenum on a notos build, waiting on the rest of the parts from Maple and c88 to arrive to see what it all can do.
Brought the regulator setting down on my U2 177 as it was pushing 18.5gr slug at 1090fps
relatively quiet too might I add but an air hog.
Put a new to me (for my buddy) PHC .22 out a new buttstock on it, paired it with an arken and an IA.
Made sure to top off all my guns for the week.
Brought the regulator setting down on my U2 177 as it was pushing 18.5gr slug at 1090fps
relatively quiet too might I add but an air hog.Put a new to me (for my buddy) PHC .22 out a new buttstock on it, paired it with an arken and an IA.
Made sure to top off all my guns for the week.
Attachments
Last edited:
Upvote 0
Get an Orion The Iguana Hunter Magazine.
They are way easier to load and they fit in the rifle better !
Plus 42.1gr slugs fit in the magazine.
Upvote 0
