What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Got my rail printed and finalized for the MFR, though will fit on the Rapid MKii as well.
Planning on running the DNT Zulus on this rifle, so may start on another mount to put the optic right on the rifle.
Upvote 0
When I shoot at cards on edge I use a scope on my crosman 1701P silhouette .177 When I am shooting targets offhand I put on a Burris FF3 red dot. Very happy with this setup.
Upvote 0
Added a click counter to my home made pellet sizing machine. No more guessing how many cast pellets I ran in a session. I also put my digital scale under the press to weigh each pellet as it drops. I basically combined 4 processes into one. Culling, sizing, counting and weighing.
Upvote 0
Very happy with my Notos and cheap red dot at 25 yards from the bench with crosman 14.3 pellets. Avg 770 fps.
Upvote 0
Nice! I don't know why everyone says the Notos has a crappy trigger, you can adjust it. I don't have a way of measuring the weight of pull on mine but 1st stage is a tad bit long but solid wall and clean break, guessing maybe 2lb pull
Upvote 0
Went plinking with a big bore, ordered some stuff for airgun projects.
Shooting a big bore is just fun.
Shooting a big bore is just fun.
Upvote 0
I played with a machine today, and it gave me this. Its not perfect yet, I've got to order some different boring bars for the O-ring grooves, but other than that it fits great. A 500cc CF bottle on it drops the weight a little over a pound, and the 700cc bottle is just about 1 & 1/4 inch past the muzzle. With the 700cc bottle its still lighter than stock.
Upvote 0
Man I love the Notos. I only use it in the backyard which is a max of 20yds for me so I started messing around with heavy pellets shot real slow. Check this out ... 25.39 JSB's @ 335fps / 6.5fpe
N/A - Low powered guns
There's room for every gun in this hobby, every speed and taste. I like to see where an item will take me, it's the journey not so much the destination that appeals to me so running a Notos to 1200fps is a fantastic journey to run. Application? Frankly, who cares? I've got 9000 feet of...
www.airgunnation.com Upvote 0
Almost done with the home made pellet sizer. Just need to drill the exit hole larger to eliminate occasional jams, remove the clamps and bolt the wooden block down. Cull, count, size and weigh all in one step.
Upvote 0
Talked with Wes in Canada. Said he forgot to add the 750L barrels and bolts to his last order. Said he would keep me posted when he does get them.
Upvote 0
Leaking from the 8mm foster fitting is the current tune
I’ve tried every M8x1 check valve I could buy from Ali and Amazon and various sizes o rings. They all blow the o ring. I ended up buying a Dream Notos reg for it because I’m at wits end with my current block.
Before I had this issue I was shooting 8.4gr @ 750 fps
Upvote 0
Damn that's a shame, this thing has been a long term build.Leaking from the 8mm foster fitting is the current tune
I’ve tried every M8x1 check valve I could buy from Ali and Amazon and various sizes o rings. They all blow the o ring. I ended up buying a Dream Notos reg for it because I’m at wits end with my current block.
Before I had this issue I was shooting 8.4gr @ 750 fps
Upvote 0
Finished up the machining work on a Stainless LW .177, then did a Bore lapping and waxing job all before 10am where temps outside were already hovering near 90*
Here it is now @ 5pm and beer thirty being balmy 101* outside.
Here it is now @ 5pm and beer thirty being balmy 101* outside.
Upvote 0