What did you do airgun related today.
- Thread starter Florida_Man
- Start date
Replace the o-ring on the outside of the regulator of my edgun lelya, I guess it didn't like me taking the reg out so many times 
. Quick and easy fix with a 30mm x 3.5mm oring and a good bit of silicone grease.
. Quick and easy fix with a 30mm x 3.5mm oring and a good bit of silicone grease.Upvote 0
Got outside with the Marauder to do a little target shooting in the quiet, still morning. After shooting about 5 targets, a male English house sparrow landed on the garden stake holding my target. What a glorious pop sound he made! My first sparrow of the season.
I pass on 90% of the shots they present me because of the backdrop. A miss or pass through would damage my property or someone else's. But this one was in the send-it zone so he took a 10.4gr pellet full in the chest at 20 yards.
I pass on 90% of the shots they present me because of the backdrop. A miss or pass through would damage my property or someone else's. But this one was in the send-it zone so he took a 10.4gr pellet full in the chest at 20 yards.
Upvote 0
Well happy Mother’s Day to that sparrow …
I shot papaer with this oldie … mountain air ( Roy meid)
2250 HPA
Upvote 0
I've been working on this for a while now and I'm finally getting it dialed in the way I want it. I had some machine time on Saturday and I got the center hubs machined. Hopefully be able to get out next weekend and test the new revisions.
Upvote 0
And this afternoon I got covers made. Should be able to sneak out and do some testing after work.
Upvote 0
Assembled another rifle from parts laying around the shop to utilize my Boyds Fortitude stock. Benji tube, boss valve w/ bulk bottom end drilled/tap for pcp. Machined aluminum barrel band and barrel sight blank off over tube. Painted royal blue, this was the last few days all in all. Just testing today, final tune 10 shot group at 30 yards. Not bad for unregulated rifle with cheap 3-9x center point scope.
Upvote 0
ordered target dots 1/4 inch to stick on Graph paper (1/4 inch ) then use it as a Master Copy for my printer '
Upvote 0
Y’all can take my 2yo boy for a bit, I just want to napI can't imagine, I'm almost 30 and I can barely stay idle
Upvote 0
Had a nice mail call. Picked up this AGT V2 in .177! Mounted a Zulus and have a few different slugs on the way to start trying out.
Upvote 0
That's a different type of busy my boy hahahaY’all can take my 2yo boy for a bit, I just want to nap
Upvote 0
Got the breech oring into the barrel I got from @thammerAnd things are looking good. Making some slugs to get some testing done.
Upvote 0
only 7:18 first cup cooling now , air gun related = waiting for USPS to deliver my target dots, Now back to coffee !
Upvote 0