Vulcan / Edgun Matador / Lalya regulator diameter help

Jump to latest Follow Reply
Jack.K

Jack.K

Member
Oct 12, 2015
916
231
San Francisco , California
anyone have access to a Vulcan / Edgun Matador or Lalya regulator. I need to get the outside diameter of the regulator as well as the distance from the valve end to the first outside o-ring. I know all three or these regulator uses a 25x3mm O-ring but I need the diameter of just the regulator. I have a friend working on making a regulator tester and wants to make it work on multiple regulators. He will be building with a tube sleeve adapter for smaller diameter regulators as well.

Thanks
 
anyone have access to a Vulcan / Edgun Matador or Lalya regulator. I need to get the outside diameter of the regulator as well as the distance from the valve end to the first outside o-ring. I know all three or these regulator uses a 25x3mm O-ring but I need the diameter of just the regulator. I have a friend working on making a regulator tester and wants to make it work on multiple regulators. He will be building with a tube sleeve adapter for smaller diameter regulators as well.

Thanks
Click to expand...

Not trying to be smart ass here but... if your trying to get the size for a certain reg wouldn't you have a gun with that reg?

Oh and I'm pretty sure you dont need the reg diameter. 

If you already know the o ring size then your good to go already. Just make the tester bore a little smaller than 25mm.

Anyhow I can measure it when I get home for you.

Sorry I did some math wrong!


 
Upvote 0
I don't have measurements to share but a couple things come to mind.

1st is that I had a Mutant (Not Veteran) reg tester and the EDgun R3 regulators fit it as is. I think the Veteran may be a tad diff. I do not know if the EDgun regs/tubes have changed diameter with the model changes.

2nd, If not here then maybe on the Talon forum, I think you could find the ID of the pressure tube. That's what you'd want to replicate for a reg tester.

I have a Lelya but don't want to pull the reg just yet, Although I do want to turn the power down a bit so I can measure it when that happens. Might be a few months though.
 
Upvote 0
anyone have access to a Vulcan / Edgun Matador or Lalya regulator. I need to get the outside diameter of the regulator as well as the distance from the valve end to the first outside o-ring. I know all three or these regulator uses a 25x3mm O-ring but I need the diameter of just the regulator. I have a friend working on making a regulator tester and wants to make it work on multiple regulators. He will be building with a tube sleeve adapter for smaller diameter regulators as well.

Thanks
Click to expand...

Not trying to be smart ass here but... if your trying to get the size for a certain reg wouldn't you have a gun with that reg?

Oh and I'm pretty sure you dont need the reg diameter. 

If you already know the o ring size then your good to go already. Just make the tester bore a little smaller than 25mm.

Anyhow I can measure it when I get home for you.

Sorry I did some math wrong!

Click to expand...

I didn't want to take apart my Vulcan yet. I was hoping someone here would have replaced their factory regulator with something like a Huma and have their factory regulator handy for the measurement. The 25x3mm o-ring size is find on the internet and that gave a total diameter of 31mm OD but I don't know how deep is the o-ring grove so getting the outside diameter of the regulator would be helpful.



Thanks for trying 
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu