Vulcan 3 112 yards 5 shots 5MPH winds

Jump to latest Follow Reply
DR OF AIRGUNS

DR OF AIRGUNS

Member
Nov 2, 2022
264
261
56
Oregon
BLACK BEAST VULCAN 3 BY TALON TUNES shooting 40 Grain slugs at 1002 FPS this thing is a Hammer set up with the best scope Athlon optics @ Talon Tunes next step will be going 200, 300 400 and eventually 500 yards😎👍

545BFFC5-D252-457F-8549-F08667C2C431.jpeg


F3689B20-29A4-412C-99D4-15CDA7C4C844.jpeg


3E66826E-67B9-4C95-BD63-03D0611B571D.jpeg


806FBD49-569D-4BF2-806B-4DAB69F1B6A5.jpeg
 
  • Like
Reactions: 7Green, TRIPP, GA_LeadHead and 4 others
I recently bought a Vulcan 3 and put on my AGM ADDER thermal scope and I got to tell you, best money I ever spent, and that thermal scope is like a superpower. OMG. I live to call in coyotes here in Nebraska, and that Vulcan will shoot sub MOA with the right slug, which my experience has shown that if you slug your barrel, then make a slug to fit the grooves not the lands.....Vulcan 3 in 30 seems to love .3055-.306 diameter slugs. Just got my Lab Radar unit in, and the Artic blast here last couple weeks has kept me from shooting much last couple weeks, but I had cast some 59 grain Hunter Magnum pellets using Al's molds from Night Owl Enterprises....NOE Molds.... and that Vulcan 3 in .30 put that 59 grain pellet completely through a 2 x 6 and halfway through a second 2 x 6 behind it, plus the moderator made it Huben quiet. Moderator is built in, and everything on this rifle seems very well made. I have not made any adjustments to this Vulcan 3 in .30 but it hits hard for sure. I will report back after this weekend on the velocity as previously I had tried my FX Radar unit, but it didnt work and I think it is because the velocity is too high, which is the only thing I don't like about the FX Radar Chronograph. The Lab Radar unit will not have that issue, but I think the FX Chronograph unit is still a decent and much cheaper way to go for guys on a budget. Big shout out to Al Nelson at Night Owl Enterprises (NOE MOLDS) for all of his help and I will be releasing a video of Al giving me a tour of his facility and explaining the various steps of making bullet molds on Youtube and I will also be releasing on Youtube a similar video with Dave Corbin, of Corbin Manufacturing and the swaging presses and dies he makes and I think he makes just the best swage dies and swage presses,, although there is a backlog on orders right now. I just love how much airguns have progressed the last couple years. OMG Its a great time to be a coyote hunter in Nebraska, and a crazy bad time if your a coyote! lol!!
 
  • Like
Reactions: DR OF AIRGUNS
Upvote 0
TRIPP said:
I recently bought a Vulcan 3 and put on my AGM ADDER thermal scope and I got to tell you, best money I ever spent, and that thermal scope is like a superpower. OMG. I live to call in coyotes here in Nebraska, and that Vulcan will shoot sub MOA with the right slug, which my experience has shown that if you slug your barrel, then make a slug to fit the grooves not the lands.....Vulcan 3 in 30 seems to love .3055-.306 diameter slugs. Just got my Lab Radar unit in, and the Artic blast here last couple weeks has kept me from shooting much last couple weeks, but I had cast some 59 grain Hunter Magnum pellets using Al's molds from Night Owl Enterprises....NOE Molds.... and that Vulcan 3 in .30 put that 59 grain pellet completely through a 2 x 6 and halfway through a second 2 x 6 behind it, plus the moderator made it Huben quiet. Moderator is built in, and everything on this rifle seems very well made. I have not made any adjustments to this Vulcan 3 in .30 but it hits hard for sure. I will report back after this weekend on the velocity as previously I had tried my FX Radar unit, but it didnt work and I think it is because the velocity is too high, which is the only thing I don't like about the FX Radar Chronograph. The Lab Radar unit will not have that issue, but I think the FX Chronograph unit is still a decent and much cheaper way to go for guys on a budget. Big shout out to Al Nelson at Night Owl Enterprises (NOE MOLDS) for all of his help and I will be releasing a video of Al giving me a tour of his facility and explaining the various steps of making bullet molds on Youtube and I will also be releasing on Youtube a similar video with Dave Corbin, of Corbin Manufacturing and the swaging presses and dies he makes and I think he makes just the best swage dies and swage presses,, although there is a backlog on orders right now. I just love how much airguns have progressed the last couple years. OMG Its a great time to be a coyote hunter in Nebraska, and a crazy bad time if your a coyote! lol!!
Click to expand...
Awesome buddy 👍
 
  • Like
Reactions: Bert928GT and TRIPP
Upvote 0
My bone stock vulcan3 30 cal is just as effective. 62.5 grain pills shooting 950 at muzzle. 300 is easy just do your part. I was hitting c zone and then head shot steel at 300 with massive decline to also adjust for. I do 50 yard zero and memory of holding over for different distances. Past 300 I have to up the turret so I have not gotten past but these are great guns just need depinger lol. What kind of moderator? I want to try fox 600!
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu