Airgun Technologies Vixen 2, Carm, MKM precision

Got the Vixen 2 long 0.177, very nice.
I have no other PCP to compare, bought it as I liked the look and what people shared about it.

We have power restriction to 7.5J otherwise I would bought the 0.22
Gun right now on 5.6J as I ordered abroad and wanted no custom issue, shoot nice in 40 m will try longer soon. Once back to the range. Shot about 800 pallet since I have it, very accurate. Will increase to 7.5J and over if I have license. I am shooting cherry from the tree with no miss from about 30 m in the garden.

Quality look good, shroud have some move but that only the cover, you can screw them in fully, very small move.(no issue for me at all and I think all ok, just sharing as I saw video on it) I prefer the look off shroud, so I removed. The barrel it self only 420 mm without shroud that built as a tank and strip down looks proper.

Noise no issue, I want mostly shoot in the range off shroud at 5.6j gun has not much noise, might be on higher Jule. The bullet hitting hard that have sound, and you can recognize after a while anyway.
I would not like being in my garden while hearing the pelet hitting something in the other garden so I will go to the range mostly.

I bought single shot tray from Carm, I needed it for competition. Only have the gun 5 days, and already has range membership for a year and they took me competition, where I needed the tray too , hard to single load with fingers. Applied for fac license also, about 6 -8 months to get.

Gun bit nose heavy if you want to cock with left hand and hold on the grip with right, moving cocking leaver to the right, so when you hold left, you will have no balance issue. (mentioning only as I saw in one video), the gun handling super and very happy with it.

Really like it, very easy to shoot, very accurate and looks very nice to me. Love it and would buy again, has no any issue or dislike.

1750846013340.jpg


1750846013344.jpg
 
Last edited:
MKM precision vertical grip
Very nice grip, I was between, Form and Ergo zero, MDT elit, I realized I want vertical, like more the precision style hold, need thumb rest also and the MKM gave that and cost was also good, purchased Audere Italy, very nice service, low shipping.

Suit the gun, feel very comfortable, purposeful, I dont need soft touch as I dont hold the gun or grip it, but this give you full support. Touch nice, hard plastic and has very good feel and dry texture, shape perfect, feels strong, I do recommend 100%.

1000022881.jpg
1000022880.jpg
1000022873.jpg


1000022883.jpg
 
Last edited:
I followed Thru! Love It!
Thank you all, thank you adding more to this post , very happy you love the vixen 2, 22 I think perfect cal, love mine, enjoy
 
View attachment 595790
Switched out the Ergo Gtip with the MKM, when I received the Grip I was convinced that I was sent a LH instead of a RH, I am Right Handed and was a little confused, but I’m going to switch the cocking lever to the right hand side and give it a go. The mag holder works out well as a left-hand grip so that should work out well..
This is the right hand one, the other side must have the thumb shelf, if it has. You can use this as traditional grip, but this created to hold the thumb on the shelf, right side , next to the trigger finger, and when you squeeze the trigger, your hand not moving side way, created for precision shooting.
 
  • Like
Reactions: Str8tshooter