Venturi Avenger Shroud Thread Pitch

[Norman1950]

I don't have my thread gauges with me, but was able to measure the ID of the shroud and came up with 22.8 mm at the threads.

Can someone confirm that the thread pitch at the muzzle end is a M24 x 1.5mm thread pitch?

Thank you for your help!

 

[brian_null]

https://www.airgunnation.com/topic/avenger-schematics/?referrer=1

Maybe that will have what you're looking for.

 

[Norman1950]

Thank you for those schematics, I can see that being very helpful.

Unfortunately it does not show the thread pitch for the "Shroud barrel front plug" or for the "Shroud barrel".

 

[my87csx481]

Pretty sure it's M24 x 1.0. I can't verify for certain because mine is not currently accessible by me.

There's a thread or two on GTA that say M24 x 1.0 also....but in reference to the Liberty (I think). Google is your friend.

I do know that both ends of the shroud (on mine) has identical threads. The shroud can not be installed backwards.



And just in case....for metric threads, the first number (M24) is the basic major OD of an OD thread. The second number is the distance from one thread to the next.

Imperial threads, the first number is also the basic major OD of an OD thread. The second number is threads per inch.

 

[Norman1950]

Thank you for this information.

 

[Norman1950]

I was able to confirm it is M24x1mm thread. I finally found time to 3D print a piece to verify the thread pitch.

Posting for future reference.