Vector Optics Paragon 5x25x56 gen ll

[steve1965]

Hi, new member here just starting out, I'm needing some guidance please on the above scope I have.
Vector have now discontinued this scope before I had the chance to buy some flip up lens caps.
Could someone recommend a brand I could get, regarding the internal thread size I have no idea what this for each end and how I would even measure it.

 

[MOhunter]

Internal threads should only matter with the screw on sunshade, if it came with one. Flip up lens caps are simple push-on products. If you contact Vector they can give you the sizes for front and back. There are plenty of places online to buy lens caps; I can't think of any right now, but I'm sure someone will chime in on that. BTW....I'm a big Vector supporter. I really like their glass quality.

 

[steve1965]

Thanks MOhunter, yes pleased with it so far.

 

[JEFFPPC]

Just measure the outside diameter of both ends and order caps. Pretty straight forward.

 

[steve1965]

OK thanks, type of screw thread metric or imperial?

 

[boscoebrea]

You only need to measure the outside,then get the push on lens caps,forget the threads thing.Let me guess the Bell IS 56 MM.
You can always go to their site and get the measurements there to.....