New 28” tj barrel with carbon shroud! I kept the oal the gun the same just ditched the shroud function for now. Its still plenty quiet. I’ll post some more pics attatched.
Uragan tj barrel and carbon fiber
- Thread starter vmaxpro
- Start date
following- like to hear if you had it set up for slugs or .....?
May I ask the aprox price for such a fine piece of work?
the stock uragan is a heck of a shooter.
I've many changes to stock guns, just because I wanted to- curious about your thoughts on changing the barrel- not disparaging your efforts, wondering if you have a direction you wanted to go with the new barrel.
May I ask the aprox price for such a fine piece of work?
the stock uragan is a heck of a shooter.
I've many changes to stock guns, just because I wanted to- curious about your thoughts on changing the barrel- not disparaging your efforts, wondering if you have a direction you wanted to go with the new barrel.
Upvote 0
Yep wanted a better barrel for slugs. The stock barrel was .306/.298 which isnt the best choice for .300 slugs. I also wanted 100fpe, and with really no room for a plenum, longer barrel it was. Today I found a sweet spot at 1014fps with nsa 44gr
Upvote 0
So far very happy with this build! A plenum would make this much sweeter but hard on the looks department lol. So here she is almost finished! Heres some specs:
removable valve, .310 steel valve 25 degrees 2mm stem , .280 throat, .264 ports, bronze valve guide, 316ss body with peek seat.
28” tj barrel
carbon fiber shroud
huma reg at 160 bar
atlas bipod
donnyfl ronin
athlon ares 4.5-27x50 ffp
tuned for 43.8 nsa at 1020 fps, 75 shots from 300 bar to 160 bar. 3/4 moa or better
This gun would be an absolute BEAST with another 40-50cc of plenum. But, I just cant see a way to make it look nice. Im open to ideas! I can easily come out the back but dont want to make the gun longer...
removable valve, .310 steel valve 25 degrees 2mm stem , .280 throat, .264 ports, bronze valve guide, 316ss body with peek seat.
28” tj barrel
carbon fiber shroud
huma reg at 160 bar
atlas bipod
donnyfl ronin
athlon ares 4.5-27x50 ffp
tuned for 43.8 nsa at 1020 fps, 75 shots from 300 bar to 160 bar. 3/4 moa or better
This gun would be an absolute BEAST with another 40-50cc of plenum. But, I just cant see a way to make it look nice. Im open to ideas! I can easily come out the back but dont want to make the gun longer...
Upvote 0
Well this will never happen again lol. I tried it at 200 yards for a quick 3 shots ( no time). Bet any amount of money I try this tommorrow and its a 2” group lol. Regardless, the gun is certainly deadly! This is nsa 43.8 slugs.
Upvote 0
I do admire the craftsmanship, I bet it's a rocker of a rifle.
We're Allllllmosst getting to the point of needing recoil pads
We're Allllllmosst getting to the point of needing recoil pads
Upvote 0
Wow, that's 101 fpe which is slightly higher than a standard velocity 22rf! I'd be happy!
Let's see lots of real world groups in calm conditions.
BTW what's the BC on those 43.8's?
Let's see lots of real world groups in calm conditions.
BTW what's the BC on those 43.8's?
Upvote 0
Whats strange, is it actually shoots better at 200 than 100. Im not sure if they stabalize better further out, or its me. Probably me lol. Worst group at 200 so far has been about 1.6” best being above pic. I can only get them accurate with a really clean barrel. I think I need to stop going between pellets and slugs each session. Nsa claims .105 for them. Seems reasonably close on my dial up. Havent measure them yet though.
Upvote 0