Uragan Compact yes, or no with the Tatsu?

[Blackpaw]

Since I have a “spare” moderator” at this time, I thought to see how the Tatsu would look on my Uragan Compact. I was using the OEM moderator I got that came with the gun from Krale, it is fine, but adds excessive length and I like the step up look of the Tatsu.

Here are some comparison photos. What do you think? Yes or no?

 

[beerthief]

i would say which ever works better for you , i would most likely use the quietest one

 

[gendoc]

as long as your gun is not the .30....i tried a tatsu on my
.30 and its power caused turbulence and wacked the accuracy.
so i got a ronin, then i got the AGT Mod that i should have in the 1st place..
much better !!

 

[douger]

TATSU WILL BE WAY BETTER AS THOSE OEM ARE DRILLED PRETTY BIG

 

[MikeVV]

I've moved to using mostly Huma M40 suppressors.
While to me (just by ear)...they are better at quieting the bark, they are also sound, tunable. In that you can add or subtract sections of the length to shorten or lengthen, a little louder, a little quieter.

Depending on the gun, I'm using from one section, to three sections of the M40 to attack the sound, and in some attempt at keeping the gun as short as possible.

I have a single segment, Huma M40 on my Uragan Compact, .22 . It's about 2" long, works well.

Mike