Uragan .30 owners

[vmaxpro]

Any of you uragan .30 owners tear into one? Looking to see if I can get one to get to 100 ftlb with slugs. Any port work possible? I see the huma helps with plenum volume a little but probably not enough. I also dont see it happening with a 570mm barrel. Any insight?

 

[Fire_at_will]

I know tony at talon tunes has got them up to 94ft lbs. And i belive that was a stock gun, i would call and talk to him, he's a good guy. (904)-333-8643

 

[vmaxpro]

Oh nice! Thanks!

 

[kezselby]

I got mine up to about 90 FPE max with 49.5gn NSA that was running a Huma at 165. The plenum isn’t the biggest IMO but 49.5gn running at 890 shot some of the best groups I’ve had

Tried most of the sub 60gn NSA and 49.5gn shot the best

 

[vmaxpro]

I got mine up to about 90 FPE max with 49.5gn NSA that was running a Huma at 165. The plenum isn’t the biggest IMO but 49.5gn running at 890 shot some of the best groups I’ve had

Tried most of the sub 60gn NSA and 49.5gn shot the best

So thats with no porting or valve work? Just a huma and hammer tune? Thats pretty respectable considering. Looks like I found my next gun for sure. Going to head to aoa on friday. I was between so many different guns and I keep coming back to this one. I bet I could squeeze 100ftlbs then, just hope its accurate. If not, I can always back it down and maybe gain a little efficency. Thanks!

 

[kezselby]

I had the Huma Reg up to 200 BAR in my tester even though it states a 150 BAR maximum. If you put it up to 180 BAR then 100 FPE should be definitely possible. 
They are great guns and you should manage plenty of shots!