Airgun Technologies Uragan 2 Depinger Power level problems?

Jump to latest Follow Reply
MJMDP said:
I know, but depending on the Power level (a .22 is not that big in a platform designed to go up to .30) it may not be of much relevance a small decrease. At least that was my hope.
Click to expand...
I finally took my gun apart and the plenum was missing the depinger 🙃 fortunately the depinger arrived today so ping begone!
 
Upvote 0
JaceSpace1369 said:
What kind of leak did you have after tearing it apart? My valve is not closing atm
Click to expand...

It must be a small clip in an o-ring or something similar. Its really small leak and it stops at around 100bar. The leak takes at least a full day to show itself.

Haven't had the time to investigate, for noe I just fill the gun and use it whenever. It works as intended for now.

Did you mess with the valve when dissasembling the gun? I haven't had any problem. How are you filling? I use a bottle so its a burst of HPA, maybe thats what it takes to close the valve until you get up to preasure.
 
Upvote 0
MJMDP said:
It must be a small clip in an o-ring or something similar. Its really small leak and it stops at around 100bar. The leak takes at least a full day to show itself.

Haven't had the time to investigate, for noe I just fill the gun and use it whenever. It works as intended for now.

Did you mess with the valve when dissasembling the gun? I haven't had any problem. How are you filling? I use a bottle so its a burst of HPA, maybe thats what it takes to close the valve until you get up to preasure.
Click to expand...
No messing with the valve, but I got it working! Greenbeans reminded me to screw the red cap the gun came with and it built enough pressure to fill the gun. I have it shooting 18.5gr slugs at 1000fps in .177
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu