Underlever PCP

[thammer]

Pretty fun little gun. KUZEY K300 fully ambidextrous with a cocking lever in the forearm. It's a little hard to see so zoom in. Still leaves room on the front for a bipod. An underlever that you can shoot from a bench. Still crunching some numbers but was right around 900 fps with hades in 22 out of the box. 

 

[JimNM]

Troy, is that a little bit smaller than the Puncher Breaker? Looks close, but hard to tell.

Is that available in .22 only?

 

[thammer]

Troy, is that a little bit smaller than the Puncher Breaker? Looks close, but hard to tell.

Is that available in .22 only?

Shroud is shorter but about the same everywhere else. Same size 280cc tube the PB has. 177/22/25 all available. 

 

[Hobbyman2007]

I’m not sure about the height on the cheek rest. Bull pups in general put the scope height way high above the barrel . Interesting design on the underlever, very cool. Pump action kinda. 

 

[shawnlyndy]

Where can you purchase these?

 

[thammer]

I’m not sure about the height on the cheek rest. Bull pups in general put the scope height way high above the barrel . Interesting design on the underlever, very cool. Pump action kinda.

Not sure why they did that with the cheek rest. It could have been much lower. I'm working on a fix for that. 

 

[TMH]

That's a nice looking rifle, and it appears that they have put so much more thought into the design and fabrication as compared to the China Beeman underlever.

And it actually looks like you could get pretty comfortable on the OEM cheek piece.

 

[Guest]

Cute little Pup

 

[BackStop]

Interesting, but the stock on the one they show on their site is different. The cocking lever is at the end of the apparently shorter stock forearm. You would have to pick the gun up off of the rest to cock it.

 

[Guest]

I’m not sure about the height on the cheek rest. Bull pups in general put the scope height way high above the barrel . Interesting design on the underlever, very cool. Pump action kinda.

Yeah that cheek piece is unnecessary, ...just remove it and put a piece of sticky velcro on the action I've done that to my Pups for years now makes it very comfortable and you stay as low as possible so in turn you can get the scope as low as possible

 

[thammer]

Interesting, but the stock on the one they show on their site is different. The cocking lever is at the end of the apparently shorter stock forearm. You would have to pick the gun up off of the rest to cock it.

//www.w3.org/2000/svg%22%20viewBox=%220%200%20210%20140%22%3E%3C/svg%3E

//www.w3.org/2000/svg%22%20viewBox=%220%200%20210%20140%22%3E%3C/svg%3E

They changed the stock on the final production guns. I'm getting new pics for the website. Very happy with the updated stock. Very comfortable to shoot. 

 

[Guest]

The gun also looks better with the shroud level with the air tube.

 

[thammer]

Here's the actual gun and stock. Easily fit a standard bi-pod. I also have one shipping to Donnyfl this week to get suppressor adapters in the works. 

 

[thammer]

 

[Guest]

Slick little system.

 

[Hobbyman2007]

Yep much better looking with the barrel/shroud even with the tube. They really look to be quality finished. Troy , what do the internals look like ? As good as the outside? 

 

[JimNM]

Does the K300 have the adjustable power (transfer port or hammer spring??) that the K600 and K900 have?



Yes it does - just saw the closeup photos on the website. Looks sharp.

Shop — The Best Airgun

Kuzey K300 — The Best Airgun

 

[thammer]

Does the K300 have the adjustable power (transfer port or hammer spring??) that the K600 and K900 have?

Yes it's an external hammerspring adjuster has about 3 full turns of adjustment equals about 1/4" of extra preload.

 

[Stretch]

Very cool design. Following...

 

[TN_Yankee]

@thammer - Whatever happened to the K300?