I just bought an umarex origin. When trying to sight in the rifle shoots 8" low and 8" right with the scope maxed out on the turrets. I've been shooting for years so I can adjust the scope correctly. I've tried 2 different scopes and different rings with the same results. Is it possible the base is crooked?or is there a way to adjust the barrel? I'm totally new to pcp rifles.
Umarex origin problem
- Thread starter uniflow
- Start date
Recommend adjustable scope rings, I've shimmed with piece of aluminum can before but would use adjustable scope rings now. WM
Upvote 0
check the tightness of the barrel grub screws, make sure they are very snug but not too tight, I use about 10 ftlbs, also make sure the shroud is tight if still bad send it back.
Upvote 0
I realigned the barrel and that took care of my windage problem. I'm going to order a set of Burris signature zee rings with 30 moa inserts to take care of the elevation.
Upvote 0