This Notos has been a project I have been working on for the past couple months. I went to a local bench shoot and now plans have changed. It started out as just a backyard plinker but this rifle isn't going to cut it on a bench. I am selling at a big loss just to fund the coming addiction. All parts are like new and have less than 300 pellets shot through them. Gun shoots excellent and is in great shape as shown in the pictures.
Work preformed
-Barrel transfer port 4.78mm
-2nd hole drilled and taped on top of receiver for using an extra set screw to clamp barrel tight
-Modified handguard to fit 56mm objective scope lens on 1.26" scope rings.
Parts installed
-CRC Plenum
-C88 side charging handle
-C88 5mm valve body
-C88 hammer weight with offset
-C88 500mm .22cal FX barrel kit+ 100mm extension
-FX STX superior 600mm .22cal liner
- .22 oem magazine
- .22 oem single shot tray
- 8mm regulator pressure gauge
Parts not installed
-FX STX superior 500mm .25cal liner
-C88 .25cal conversion kit w/magazine
-OEM .22 barrel/moderator setup
-Extra OEM tank w/regulator and fill port
-Tons of Notos specific O-rings
- Buck rail gip adapter(Not pictured)
So if you are like me and cant leave anything alone for too long and like having the ability to swap stuff out, this is the perfect rifle. I am looking to get $500 plus shipping for the lot of this rifle. Any question please reach out. Scope setup and moderator not included with sale of rifle. Thanks.
Work preformed
-Barrel transfer port 4.78mm
-2nd hole drilled and taped on top of receiver for using an extra set screw to clamp barrel tight
-Modified handguard to fit 56mm objective scope lens on 1.26" scope rings.
Parts installed
-CRC Plenum
-C88 side charging handle
-C88 5mm valve body
-C88 hammer weight with offset
-C88 500mm .22cal FX barrel kit+ 100mm extension
-FX STX superior 600mm .22cal liner
- .22 oem magazine
- .22 oem single shot tray
- 8mm regulator pressure gauge
Parts not installed
-FX STX superior 500mm .25cal liner
-C88 .25cal conversion kit w/magazine
-OEM .22 barrel/moderator setup
-Extra OEM tank w/regulator and fill port
-Tons of Notos specific O-rings
- Buck rail gip adapter(Not pictured)
So if you are like me and cant leave anything alone for too long and like having the ability to swap stuff out, this is the perfect rifle. I am looking to get $500 plus shipping for the lot of this rifle. Any question please reach out. Scope setup and moderator not included with sale of rifle. Thanks.