TX 200 HC tuning kit

Jump to latest Follow Reply
T

Tamatie

Member
Aug 21, 2022
212
146
46
Arkansas
Good day Airgunner,s.
I am in the marked for a upgrade tuning kit for my TX200HC in .177 to be used for HF/FT

Would like a tuning kit sub 12ft/lb.

What is the recomended to go for kit and if anybody have some contact info where to order kits from, please any info available.

Regards
Werner Enslin
Tamatie [ # Tomato ]
 
Install this piston rod and then I like the Vortek PG4 12ftlb kit and Vortek piston seal in there. That piston rod will shorten the stroke so that will ultimately rob the spring of a little power. I simply just asked Vortek to add two coils to the spring and went from there. I believe I ended up snipping 1 extra coil and then adding 1 small washer to shim the spring some.
 
Upvote 0
Probably the most expensive, but also probably the best are Tony Leach kits. I have two with 22mm skirtless pistons. On my first kit, I had to install a sleeve inside my compression tube, but the second one I got a complete drop in kit that includes a compression tube. Both shoot beautifully at sub 12 ft/lb. They are becoming very popular. I'll have an order in for a skirted piston with spring and fitted guide as soon as a buddy of mine decides what he is going to order. Can contact through "Lost Volume" on FB.

Tim
 
  • Like
Reactions: whyzee
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu