Tuxing gaskets

[drug2]

Hey my tuxing compressor is leaking air at the bleed block.

At the blue arrow there is lil hole in the bleed block to release the air when you open the bleed screw and at this hole the air is constantly coming out. even with the bleed screw all the way screwed in.

I'm trying to figure out which gasket i need there. the ones i have as a spare don't seal/fit. its a white ptfe gasket. seems like the spare ones are not thick enough.

Tuxing itself just says its a white gasket...like the ones you have at the filters and hoses. but they are to thin :/ they fit in diameter but not in thickness

 

[Sergey1972]

Flip the old one over so you are using a new side or double stack.

 

[drug2]

Already tried it and it does not work. I realy need a new gasket but i can't fine the right one

 

[SLICKNICK]

https://a.co/d/cgzFjo6 seal kit works on many compressors. It may have the seals you need

 

[drug2]

I got that one but still not solving my problem.

the gaskets look the same but it's still not sealing