Hey guys, I pulled the trigger on my new bobcat and don't like the first stage. As this is my first bobcat I don't want to mess anything up playing with this without getting some feedback first. Thanks Steve.
Once u take the screw off there is a small rubber ball at the end of the screw. It provides a cushion for the screw and the tank rests on the ball. Check the link below. You will see the rubber ball."SteveS." Ben, I didn't know you could take the tube off without decompressing it. So I can buy a couple of air cylinders to take out hunting with me instead of taking out my big one then. Learn something new everyday.
Nat, are you referring to the screw that tightens down on the air tube? Best and thanks guys, Steve
Steve, what about the first stage do you not like. The pull length? Finger position? I ask because different screws do different things."SteveS."Hey guys, I pulled the trigger on my new bobcat and don't like the first stage. A
"SteveS."Hey guys, I pulled the trigger on my new bobcat and don't like the first stage. As this is my first bobcat I don't want to mess anything up playing with this without getting some feedback first. Thanks Steve.
If the Bobcat is anything like the Royale's here's a good video.
JK
http://airgunnation.dev/topic/fx-500-trigger-adjustment/