My transfer port would not work and was very tight so i watched the Great Ernest Rows videos on how to take apart my Crown II . Took the wheel off then went to the other side to take the screw out no problems pushed the transfer mechanism out and noticed the transfer port had scaring like it was spinning in position. From my determination the screw that held the transfer port in had loosened a tad bit and when i turned the transfer port wheel the mechanism spun and scared it so put some silicone oil on the o rings put it back together and you can feel the notch when it slides all the way in put everything back together and works like a charm. Ernest videos are very detailed and he is very descriptive on how to take apart and put back together properly. Thanks Ernest
