4 of my fly rods are AFTM 3 - 7 are 6 to 11 feet long, but i only have 2 reels for these.
Same go for the 3 12 - 14 feet 2 handed fly rods, one reel with floating line, one reel with sinking line.
I do have 3 reels for my surf casting rods, and 4 of those rods, also 12 - 14 feet long.
The spinning rods i have 5 of, from 8 to 10 feet, the longer ones also used in rivers, on the coast i generally use 9 feet rods and most often casting weight of 10 to 20 grams
Also have a 6 foot spinning rod that have a MAX casting weight of 10 grams, used that a lot in put & take lakes, for both spinning or bait fishing.
Using this tiny rod and equally tiny reel, and hooking up to a 4-5 kilo rainbow trout, using 0.16 mm line, well you can not rush it, and the damn rod will nearly fold over on itself.
i also have 2 rods for deep sea fishing, which here are mainly COD, but one of them i have a HUGE reel generally for shark / tuna fishing.
And i am very glad that the tuna are back in Danish waters after having been gone since the late 60ties, BUT ! i do not have the strength to go fishing for such things today.
Actually pulling a huge 10 - 15 kilo Cod up from +100 M below, that would probably be pushing it for my physique today.
TBH so i think a whole day on the coast with a fly rod would not be good for my shoulder and elbow, severely worn bu a few years working as a painter.
Thats just some of the rods i recall, i am pretty sure there are more, i have not used either of those since 2006 or so, so if i was to go fishing, well new line would be a must have.
