I finally got to work on my nova liberty 22, I drill out the barrel port, added two more washer to the hammer spring and turn the regulator up half of turn. I put everything back together to test it out and it seems to be alot louder even with a moderate on. Is it just me or have someone have the same thing happened to them, I know with more power the gun get louder but it just seems to be too loud.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Too loud
- Thread starter Fongy18
- Start date
too much hammer , the valve is still open when the pellet leaves the barrel most likely, tuning can be a delicate balance of plenum pressure hammer weight and spring , transfer port diameter , and a few other things that a few guys here on this site can maybe help you with .
Upvote 0
Somewhat obvious..!
More air volume down the barrel, more air pressure down the barrel...more noise...out of the barrel !
You did this to yourself.
Mike
More air volume down the barrel, more air pressure down the barrel...more noise...out of the barrel !
You did this to yourself.
Mike
Upvote 0
My experience with venting the shroud, changed the tone, but not lower the overall db reading. The foam can compress, and become louder.
Damage to the barrel o-rings or probe ones, will be leaking and loud.
As others said, can be just the power increase or too much dwell.
Damage to the barrel o-rings or probe ones, will be leaking and loud.
As others said, can be just the power increase or too much dwell.
Upvote 0