I bought a Walnut .30 Cal, I had it for 30 minutes and noticed that jagged hole in the top Right back corner of breech. It actually cut me
I see you have a hole in yours as well, Mine was on the corner and was very poorly done and engineered. apparently these are free hand drilled as they are in a different locations for all of them I have seen
The hole illustrates the thin metal used in manufacturing, it is surprisingly thin. Explains how light the rifle is. -out
For an $1,800 pellet rifle, I thought it was too poorly thought out, not to mention I had to look at every time I shot it.. so I returned it. Also, Not a fan of the Rotating Lock-out Silencer, it was hit or miss and clumsy, the Base would unthread etc. I also think at this price point there should be a protection for loading a second third etc pellet in the chamber.
It didn't come with a single shot tray. The walnut stock was VERY thin at many places most noticeable around the O2 Bottle, which brings me to the Carbon Bottle, it looked like it was made by a 5 year old in fiberglass class. It is bumpy, textured, and looked like it didn't belong on a $1,800 gun. ITS UGLY. The fill port is millimeters away from the Gauge on the bottom, be carful you don't break the gauge.
I am not trying to rip this rifle, there are great things about it, like........... Regulated power, an accurate barrel, and fairly quiet.. but isn't this already done by others for hundreds less?
I see you have a hole in yours as well, Mine was on the corner and was very poorly done and engineered. apparently these are free hand drilled as they are in a different locations for all of them I have seen
The hole illustrates the thin metal used in manufacturing, it is surprisingly thin. Explains how light the rifle is. -out
For an $1,800 pellet rifle, I thought it was too poorly thought out, not to mention I had to look at every time I shot it.. so I returned it. Also, Not a fan of the Rotating Lock-out Silencer, it was hit or miss and clumsy, the Base would unthread etc. I also think at this price point there should be a protection for loading a second third etc pellet in the chamber.
It didn't come with a single shot tray. The walnut stock was VERY thin at many places most noticeable around the O2 Bottle, which brings me to the Carbon Bottle, it looked like it was made by a 5 year old in fiberglass class. It is bumpy, textured, and looked like it didn't belong on a $1,800 gun. ITS UGLY. The fill port is millimeters away from the Gauge on the bottom, be carful you don't break the gauge.
I am not trying to rip this rifle, there are great things about it, like........... Regulated power, an accurate barrel, and fairly quiet.. but isn't this already done by others for hundreds less?
Upvote 0