To all HW 97K owners

[Footloose]

Hey guys , If your having issues with the cocking lever pin , then you need this grooved clevis pin and clip , Its like they were made for this gun a perfectly tight fit . Maybe It will also fit a lot of other under levers .
Hope this helps .

2 PCKS 3/16 X 1/2 CLEVIS PIN WITH RETAINING RING GROOVE | eBay

3/16 X 1/2 CLEVIS PIN WITH RETAINING RING GROOVE18-8.

www.ebay.com

 

[crowski]

I just ordered 2 packs. Just changed a lever on a 97. Good to have. Thanks Crow

 

[rangur1]

Good to know!

 

[terrysmith53]

Thanks for the tip.

 

[cjtamu]

Going to order a couple for future reference. Thanks.

 

[outdooorgb]

My HW97 is quite new but that area seems a bit loose, noisy when cocking.

Thanks for the heads up, ordered.

 

[abslayer]

You will never be sorry for buying HW97

 

[UncleB]

Hey guys , If your having issues with the cocking lever pin , then you need this grooved clevis pin and clip , Its like they were made for this gun a perfectly tight fit . Maybe It will also fit a lot of other under levers .
Hope this helps .

2 PCKS 3/16 X 1/2 CLEVIS PIN WITH RETAINING RING GROOVE | eBay

3/16 X 1/2 CLEVIS PIN WITH RETAINING RING GROOVE18-8.

www.ebay.com

View attachment 332297View attachment 332298

These are 3/16 while the cocking lever pin is 5 mm. They’re going to be a little bit loose as 3/16 is smaller than 5 mm.

 

[Footloose]

These are 3/16 while the cocking lever pin is 5 mm. They’re going to be a little bit loose as 3/16 is smaller than 5 mm.

Yes I knew that when I bought the pin...There Is absoulutly no play when cocking the gun .

 

[Bad News Beeman]

Just picked up a HW97 so this is very timely advice, thank you for the heads up!

 

[outdooorgb]

Before I dig into the internet for pics and diagrams, is there a simple way to remove the OEM pin?

 

[Footloose]

Before I dig into the internet for pics and diagrams, is there a simple way to remove the OEM pin?

I think you knock It out with a punch..Mine fell out on Its own .

 

[Gunnertrones]

Thanks. Just what I needed for my HW77