Threaded adapter for RAW HM1000X CFOS

[Diamondback]

I noticed my RAW HM1000X has a threaded nut / screw at the muzzle end of it’s CFOS (Carbon Fiber Offset Suppressor) that takes an Allen key.

Id like to replace this threaded piece with a piece that will secure the CFOS, but have a 1/2 x 20 threaded male extension so I can add any LCD I like.

Yes, I realize it will be even longer, heavier, etc, but I plan on using this rig for rested shooting.

Anyone make a piece like this?

 

[mtnGhost]

I noticed my RAW HM1000X has a threaded nut / screw at the muzzle end of it’s CFOS (Carbon Fiber Offset Suppressor) that takes an Allen key.

Id like to replace this threaded piece with a piece that will secure the CFOS, but have a 1/2 x 20 threaded male extension so I can add any LCD I like.

Yes, I realize it will be even longer, heavier, etc, but I plan on using this rig for rested shooting.

Anyone make a piece like this?

Refresh my memory - is it metal or acetyl / Delrin? (I sold my HM1000X and accessories a little while back)

 

[bucketboy]

Yes, take off all the RAW parts and throw them away. Fit a 1/2” 20 unf adaptor to the barrel and fit a weirauch moderator.

i did a thread last week, “quiet.30 RAW” have a read of that, it makes a massive difference to the noise without adding much length.



Bb

 

[stoti]

Here you go. I don’t know how you’d add anything to it because the end cap is attached. I think most just start fresh by adding an adapter or threading the barrel.

 

[Diamondback]

Basically, I want to replace the nut / bolt with one that will secure the shroud endcap like the original, but have a 1/2x20 threaded male extension, like in my edited pic:

 

[Diamondback]

Great info BB, I like that.

I remember seeing a neat Crosman pistol built into a backyard rat bapper, that used a TKO inside a shroud for controlling lead dust. 

https://www.tapatalk.com/groups/yellow/urban-rat-gun-t228778.html#p2529691 

 

[jaird]

Check with Ken Hicks at spaweapons.com . He might be able to help.