I have a HW95 k, 12.25" threaded barrel. I currently have a moderator on it but would like to remove it at times and just add something to protect the threads, maybe 3 or 4 inches long, 1/2-20. Any ideas, the threaded length of the barrel is a little over an inch.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Thread Protector
- Thread starter jccams
- Start date
Something like this may get you on the right path.
Coupling nuts, Zinc plated steel, 1/2"-20 x 1-1/4" - Bolt Depot
www.boltdepot.com 
Upvote 0
I will shoot it this way. Think the barrel weight on the newer HW98, that is what I'm after.
Upvote 0
Easiest and cheapest is this:
1/2 UNF (20) tap requires a 11.5mm or 29/64 drill bit.
Buy a drill bit and walk around Lowes/Home Depot/ACE hardware looking for a pipe/tube the drill bit does not fit in. Drill and tap to the desired depth.
This could be copper, PVC, steel, etc.
1/2 UNF (20) tap requires a 11.5mm or 29/64 drill bit.
Buy a drill bit and walk around Lowes/Home Depot/ACE hardware looking for a pipe/tube the drill bit does not fit in. Drill and tap to the desired depth.
This could be copper, PVC, steel, etc.
Upvote 0
Have a look at the DonnyFL adapters; https://utahairguns.com/search.php?search_query=donnyfl
hope this helps you!
hope this helps you!
Upvote 0
should be pretty simple to turn down and tap an aluminum cap, or make it into a muzzle brake looking piece if you have a machine shop close ... also a cayden has one ready made if crosman has them as a part that can be ordered, its 1/2 20 ... the base may need to be slightly modified to blend to your barrel ...
Upvote 0
It sounds like AOA can order the muzzle weight that comes on the field pro which is exactly what I want. I’ll know for sure next week. Thanks for all the suggestions.
Upvote 0
