The pressure of the regulator of the Taipan Veteran Long .25 ?

[SvilenP]

Hello friends,
Does anyone know how many bars the rifle regulator is set at the factory?
and what pressure should it be set if it's not enough for you?

If it matters, I would like to use the JSB Diabolo Exact King Heavy MKII 33.95 gr to which I want the rifle to be set.

Thanks in advance!

 

[Jayson]

I don’t know what the factory sets the reg at? I’m guessing around 150-160 bar? But mine came set up perfect for that pellet, pushing it around 900 FPS , very accurate, I wouldn’t want to change that? 

 

[ackuric]

I don't have a clue and I am sure not every rifle leaves the factory floor with precisely the exact same setting. The above posters guess is likely in the ball park though and should be plenty good for your intended ammo. Gathering the data yourself (ie: shoot over a chronograph, and shoot groups to see if the pressure/rifles settings + ammo are in harmony) would likely result in the best answer.



GL

-Matt

 

[SvilenP]

Thank you friends, I have read that in principle the rifles have a factory setting of the regulator at 120-125 bars but somewhere I do not remember where I read that the pressure of the Taipans regulator is 150 bar. I was not sure whether it was factory or was set up afterwards …

I have not decided yet to which pellets I will adjust the rifle 25.39 or 33.95 but I want to have information because I know that only with the adjustment of the hammer spring will not be enough on the heavy pellets. 

PP. If everything is fine on 16.04 rifle will be with me