the most accurate pellets ever!!!

[Guest]

Hey guys. I've posted a few threads here about testing different lubes, washing and lubing, just lubing and shooting pellets straight out the tin. My results showed that washing and lubing pellets with abu garcia silicote reel oil had the best results for accuracy and consistancy. I was thinking that if I could get the pellets even cleaner I might have even better results. I was correct in thinking this. I soaked pellets in Hoppes no. 9 bore cleaner for 15 min. Stirred them around, rinsed and put them in hot soapy water (dawn), stirred them and rinsed, then into rubbing alcohol and a good rinse. These pellets were the most shiniest, cleanest pellets I've ever seen. After drying in the toaster oven I lubed them and was able to shoot 3 mags before it got too dark out. Jsb 33.95gr mk2 out of my .25 wildcat at 65 yds. Back to back 5/8 inch group's followed by 8 shots at my shooting gallery hitting every target ( 1/2 inch spinner rods) a couple pieces of chalk and two thumb tacks. I can't wait until tomorrow to get back out there.

 

[Monkyshine]

If it will quit raining I will be trying the same .25 mk2 pellets through my Bobcat mk1. It presently shoots the kings @ 910fps .5 groups at 50y. I am anxious to get my results. The state of NC is going through a monsoon season.

 

[Guest]

I'm in Ct so its working its way up the coast. I was supposed to get 7 tins of the 33.95 mk1's and just 1 tin of the mk2's. I know the mk1's are great and never shot the mk2's so I wanted just 1 tin to try them. They ended up shipping me 7 tins of mk2's and 1 of mk1. At first I was a little upset but after shooting those 3 mags I'm pleasantly surprised. These might be my new pellet.