The EDgun's valve was broken ,who can help me?

[liudeng]

My EDgun was leak because of the valve was broken. I have mailed the TonyRudenko, talontunes and TGAG,but no one reply me ,i don't know why? I don't know how to send pictures in the forum.


Now i can go to the forum to seek God help, I have to get a new valve to instead , who can provide me ? Thanks all friends who see the topic.

 

[liudeng]

How to upload the picture which had broken?

 

[Erik]

Contact John hagan at hagantools i belive, here is the fix

http://talonairgun.com/forum/viewtopic.php?f=34&t=34288

 

[liudeng]

~original

~original

 

[Erik]

http://talonairgun.com/forum/viewtopic.php?f=34&t=34288

 

[liudeng]

 how to contact John hagan ? I don't know his email ,please tell me his email thank you very much. I will pay him to get the new valve stem. Tony.R ,do you have the accessory? I have send you several email ,but no one reply,my email is [email protected], I hope you can reply me thank you very much.

 

[Erik]

Sorry, here is his email [email protected]

 

[bornkiller]

That valve is for a .22 or a .25 
john Hagen has a valve for the .30 caliber
what caliber is your gun 
mid it's a .22 or .25! Edgun u need to contact 
ernest rowe he has valves upgraded valves ready to send 
u will never get any support from Tony Rudenko or Ed their customer service is no. Existent that's why I won't buy another Edgun 

 

[bornkiller]

If your Edgun i don't believe u mention the caliber but looking at your valve is say it's .25 but 
if it's .30 then yes contact John Hagen 

 

[liudeng]

My edgun is .22cal(5.5mm),but how can i contact ernest? Can you give me his email? Thank you very much

 

[Erik]

http://sniperlabyo-precision-airguns.com

sniperlabyo on this forum is Ernest

 

[sniperlabyo]

I have some, contact you later 

 

[liudeng]

Thank you very much

 

[liudeng]

My email is [email protected]
Ernest please contact me ,i will buy this accessory from you. Thank you very much

 

[liudeng]

Tony.R i need five sets all type of o-rings .Did you provide me? i will pay your money.Thank you

 

[Erik]

Ernest is the guy to talk to, not me

 

[sniperlabyo]

The matador aluminum VS, you need to cut the rod end same as length as the original, i'l trow in oring kit to reseal the whole AT.

 

[liudeng]

Thank you very much. Contact me use forum message

 

[liudeng]

I have send email to [email protected] , if you receive my mail please reply me ,thank you 

 

[sniperlabyo]

sorry go busy, got your email, taking inventory---you said you wanted 25 MK1 VS and 12 MK2 VS????? -------> joking!!