Airforce Tex-rex 50cal custom build

[Cheplicki]

So I've done a few videos on the tex-rex 50cal and it's been a pretty good gun but I figured I could make better.. first I 3d printed my own stock and grip.. then I made a 4in long rubber bushing to slide over the barrel and fit inside the frame to act like a a shock absorber. I cut 7in off the barrel. Re-crowned it. Polish the barrel and Finley added a muzzle break... This is like a completely different gun and shoots amazing.
4 shots at 60 yards 345gr mr.hollow point slugs

 

[Nealgl1985]

Can you tell if the internals are the same as the older model texans or did they upgrade things inside to handle the new valve and higher pressures?

 

[Cheplicki]

Can you tell if the internals are the same as the older model texans or did they upgrade things inside to handle the new valve and higher pressures?

In my opinion they probably only made the part around the hammer and spring stronger.. everything else seems the same

 

[Ezana4CE]

@Cheplicki Where’d you get the slip on muzzle brake?