Testing The H&N Hornets in .22 and .25

[Guest]

I finally tested the H&N Hornet pellets in .22cal and .25cal today on airgun Shooter! I was pleasantly surprised. Too bad I lost the scope stop screw on the Hatsan though.

 

[SendinSlugs]

My .25 striker edge lost the screw holding the scope stop too,I couldn't find a replacement screw that didn't protrude into the compression tube so I just place the pin from my mounts into the holes now,be warned if you go that route it will strip the treads in the holes and deform the soft steel that hatsan uses.

 

[Guest]

Thanks. I was afraid of that. Gotta figure something out?

 

[Guest]

Also, here's the chrono readouts from the video. Plus a couple more that are relevant. I hope y'all find them useful?
.22 H&N hornet 16.2gr in Hatsan Striker 1000x;

​.25 hornet 24.38gr through Benjamin Trail NP XL725;

​And, as points of interest, JSB King .25 - 25.39gr/NP XL725;

And H&N FTT .25 @ 19.91gr/.Trail NP XL725;