Tequila Gun PCP
- Thread starter Xolotl
- Start date
I send to you a sms (I got your phone number of you eBay account. Please check it and let me know what is your next step.)
OK , Got it, Your shorty will be about two weeks out,,,
I cant wait to test it out and play with it,, Lot of good things have been said about your Pistol..
Please contact me for anything PM me or Tex me 432 553 9261
Mike
I cant wait to test it out and play with it,, Lot of good things have been said about your Pistol..
Please contact me for anything PM me or Tex me 432 553 9261
Mike
Last edited:
Upvote 0
What a great customer service you offer, Alfonso!!
Very cool!
This convinces me I should be buying that semi-automatic you've been working on.
Matthias
Upvote 0
Look's like I am the only one getting a shorty or a micro , Just to kill a few hours I went back and read all the post from the very start, Lots of good info that I caught the second time of reading , Wish I had the machines and skill to build my own pistol, I hope to get a shipping date pretty soon.
Mike
Mike
Upvote 0
I just hope you don't have any expectations of shooting 100 yards with it. Just don't pull any of the stupid stunts I did in my destructive testing by the brain dead.
Upvote 0
LOL, I got a few PCP pistols that I will be comparing it with,, GKl 25 shorty, PP 750 22, PP 700 - 22 ,Reximex -22
100 yards , LOL I sight all my pistols in at 500 yards , Ha, Ha,
What kind of destructive testing did you do? Throw the pistol at the target ,
Mike
Upvote 0
Think of a way to screw it up and I succeeded. Brain dead people shouldn't have new toys. But....Alfonso took care of me, we worked together on some minor bugs in the design and a few small improvements. I lost the end of my R middle finger, so I needed a larger grip, he printed one, it didn't withstand the strain and broke, so he may a carbon fibre one for me, works great. We did a shoulder stock for the gun, cool design, then improved the rear sight mount from plastic to aluminum. crazy tight fit. He's a great guy, clever as hell. I use to work to very tight tolerances in a previous life, it's crazy how tight the fits are on his guns.....hey FX take note.
Upvote 0
WE all know the FX is way over rated,
Alfonso is working on my pistol , So no rush, Cocking on left side, shorty or micro, 22 caliber,, regulator , Top dollar top gun , Accuracy above all else ..
This is the most expensive pistol I have ever bought except for the 25 GKl shorty , Ya, I blew it on that one but it flips me out every time I pull it out to shoot it ,, I look forward to putting the Tequila up beside the king of air guns ,
Mike
Alfonso is working on my pistol , So no rush, Cocking on left side, shorty or micro, 22 caliber,, regulator , Top dollar top gun , Accuracy above all else ..
This is the most expensive pistol I have ever bought except for the 25 GKl shorty , Ya, I blew it on that one but it flips me out every time I pull it out to shoot it ,, I look forward to putting the Tequila up beside the king of air guns ,
Mike
Upvote 0
What I didn't understand is you have to push the cocking tang to the right to pop out the cocking lever. Oh Oh
You still ain't going to be shooting 100 yards with it. Ok you can shoot 100 yards, where the pellet goes is completely up for grabs.
IMO FX makes some good guns but you'd best be ready to tweak them a whole bunch. I've had issues with my Raptor, once I got it sorted out it was fine. My biggest beef with my Mavericks is the fit of the cocking lever, FX needs to work on their fit, that's one thing that you feel first, last and always.
Upvote 0
? did you loose or misplace your end of your middle ring finger? Or did you shoot it off?
Mike
Upvote 0
A serious nail biter, got a smidge carried way , went down past the nail.
Really a really stupid industrial accident that could have been easily avoided if the company I worked for hadn't be some cheap pucks. I'd never shoot my finger off, I always look down the barrel to make sure the guns are clear.
Upvote 0
I went into a full laugh on that one , LOL. I have always thought its crazy putting the gauge at the end of the barrel,,, I think all the old timers have learned to look sideways at the gauge at the end of the barrel,,,A serious nail biter, got a smidge carried way , went down past the nail.
Really a really stupid industrial accident that could have been easily avoided if the company I worked for hadn't be some cheap pucks. I'd never shoot my finger off, I always look down the barrel to make sure the guns are clear.
I may have a shot of tequila when my Tequila pistol gets here just to celebrate ,, Ever hear the old farts complain times seems to speed up,, Tell them to buy a new PCP, time will stop, LOL.
Mike
Upvote 0
Hello Mike,
The parts are not delivered yet. According with the supplier the estimate delivery date is the end of this week or the start of the coming week.
There are two parts that I am waiting for this supplier, the air deposit (tube) and barrel shroud.
The other parts are like magazine, barrel, trigger assembly, receiver assembly, grip assembly and hardware are ready.
As soon as I received the two parts missing I will start the gun assembly.
Regards
Upvote 0
Also I am waiting fa 3D printing parts for the same supplier. I am working in a new product.
The parts that are in the right corner were designed to attach a trijicon red dot in the TequilaGUN micro. One pair of them are included with your purchase.
The parts that are in the right corner were designed to attach a trijicon red dot in the TequilaGUN micro. One pair of them are included with your purchase.
Upvote 0
Alfonso,
I think I have to start thinking which PCP to sell — so I can buy your Tequila pistol when it comes out in semi-automatic!
It's just so cool!
Thanks for building something cool looking like that!
Matthias
Upvote 0
I can give you a picture of mine installed.... It's actually two pieces, really cool how it works.
Upvote 0