I've never claimed to be a machinist and my lathe and mill are both manual but still fun to build on. May not be the prettiest but hopefully very functional. Going on my HFT rifle.
Lightened the hammer to 35g with a peek striker. Heavier spring in free flight. Trigger polishing and barrel polishing. Tensioned shroud with airstripper and a Huma reg at 130bar/1900psi.
Lightened the hammer to 35g with a peek striker. Heavier spring in free flight. Trigger polishing and barrel polishing. Tensioned shroud with airstripper and a Huma reg at 130bar/1900psi.
Very nice work Troy. Do you think 130 bar might be a bit high for such a small, light pellet? Or are you balancing it with the hammer strike?