Tuning Tc wildcat getting blowback from the action help

[stre-tch]

Any great tutorials on what I need to replace in my wildcat? 


I’m getting more blow back out of the back of the action and air in the face from the action where the pellet o-ring seal (making up the name) is. 


I was/am going to take it into Utah air guns if I can’t find a good tutorial and see what it’s going to need. 


it’s quite a bit louder now and it happened over the course of 1 magazine this weekend. 

 

[madeintheuk]

Sounds like the breech oring is damaged. 

 

[stre-tch]

Would that cause a bunch of air to blow back through the action? 


also now the action doesn’t cock the trigger all the time.

seems like it needs seals replaced and a tune up. 

 

[ace7691]

Im thinking your cocking handle block has slipped on the linkage i have had two of them do that . it sets under the scope mount has two grub screws that hold it on the linkage bar that is a silver rod running back to the action block. They become loose sometimes Im going to start putting blue loctite on mine.

 

[Rbsusenbach]

Hello. My Wildcat MK3 8s doing the same thing.and sure enough the two grub screws were loose. I tried to get the silver cooking rod back in what looks like the right spot (I'm guessing) and tightend the 2 grub screws but im still gettng blowback. How do ensure the transport port is aligned with hole in pellet probe. Thank you for your time. 

Bobby Sus3nbach

8503333247

[email protected]